Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesSMD LED 0603 Orange 90 mcd 155 ° 20 mA 1.9 V

Description

This series of right angle mount

ChipLEDs is designed with the

smallest footprint to achieve high

density of components on board.

They have the industry standard

footprint of 1.6 mm x 1.0 mm

and a height of only 0.6 mm. This

makes them very suitable for

cellular phone and mobile

equipment backlighting and

Agilent HSMA/C/L-C120,

HSMD/G/S/H-C120, HSMM/N/Q/R-C120

Right Angle ChipLED

Data Sheet

Features

• Small size right angle mount

• 0603 industry standard footprint

• Operating temperature range of

–30˚C to +85˚C

• Available in various colors

• Compatible with IR solder reflow

• Available in 8 mm tape on 7"

diameter reel

• Reel sealed in zip locked

moisture barrier bags

Applications

• LCD backlighting

• Keypad backlighting

• Pushbutton backlighting

• Symbol indicator

CAUTION: HSMM/N/Q/R-C120 LEDs are Class 1 ESD sensitive per MIL-STD-1686. Please observe

appropriate precautions during handling and processing. Refer to Agilent Technologies Application

Note AN-1142 for additional details.

indication application where

space is a constraint. They are

available in a wide range of color

combination. In order to facilitate

automated pick and place

operation, these ChipLEDs are

shipped in tape and reel, with

4000 units per reel. These parts

are compatible with IR soldering.

Summary of content (10 pages)

PAGE 1
Agilent HSMA/C/L-C120, HSMD/G/S/H-C120, HSMM/N/Q/R-C120 Right Angle ChipLED Data Sheet Features • Small size right angle mount • 0603 industry standard footprint • Operating temperature range of –30˚C to +85˚C • Available in various colors • Compatible with IR solder reflow • Available in 8 mm tape on 7" diameter reel • Reel sealed in zip locked moisture barrier bags Description This series of right angle mount ChipLEDs is designed with the smallest footprint to achieve high density of components on board.
PAGE 2
Package Dimensions CATHODE MARK (ANODE MARK FOR HSMH-C120) LED DIE 0.6 (0.024) 0.3 (0.012) 1.6 (0.063) POLARITY[3] 1.2 (0.047) CLEAR EPOXY 1.0 (0.039) 0.4 (0.016) PC BOARD 3 – 0.3 (0.012) CATHODE LINE SOLDERING TERMINAL NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED. 3. POLARITY FOR HSMH-C120 WILL BE THE OPPOSITE OF WHAT IS SHOWN ON ABOVE DRAWING.
PAGE 3
Absolute Maximum Ratings at TA = 25˚C Parameter DC Forward Current[1] [2] Power Dissipation Reverse Voltage (I R = 100 µA) LED Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature HSMA/C/L- HSMD/G/S- HSMHC120 C120 C120 25 20 25 60 52 65 5 5 5 95 95 95 –30 to +85 –40 to +85 See IR soldering profile (Figure 6) HSMM/NC120 20 78 5 95 HSMQ/RC120 20 78 5 95 Units mA mW V ˚C ˚C ˚C Notes: 1. Derate linearly as shown in Figure 4. 2.
PAGE 4
Optical Characteristics at TA = 25˚C Part Number HSMA-C120 HSMC-C120 HSML-C120 HSMD-C120 HSMG-C120 HSMS-C120 HSMH-C120 HSMM-C120 HSMN-C120 HSMQ-C120 HSMR-C120 Luminous Intensity Iv (mcd) @ 20 mA[1] Min. 25 25 25 2.5 4.0 2.5 4.0 40 10 40 16 Typ. 90 90 90 8 15 10 15 120 30 145 55 Peak Wavelength λpeak[2] (nm) Typ. 595 637 609 605 570 630 660 523 468 520 469 Dominant Wavelength λd[2] (nm) Typ. 592 626 605 604 572 626 639 525 470 527 473 Viewing Angle 2 θ1/2 Degrees[3] Typ.
PAGE 5
100 Orange Color Bins Dom. Wavelength (nm) Bin ID Min. Max. A 597.0 600.0 B 600.0 603.0 C 603.0 606.0 D 606.0 609.0 E 609.0 612.0 F 612.0 615.0 RELATIVE INTENSITY – % Color Bin Limits HER 70 60 GaP ORANGE AlGaAs RED 50 40 30 20 10 550 600 650 700 750 WAVELENGTH - nm 100 RELATIVE INTENSITY – % Please contact your Agilent representative for information on currently available bins. GaP GREEN 80 0 500 Tolerance: ± 1 nm Notes: 1.Bin categories are established for classification of products.
PAGE 6
1.2 1.0 1.0 LUMINOUS INTENSITY (NORMALIZED AT 20 mA) LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 1.2 0.8 AS AlInGaP 0.6 AlGaAs 0.4 GaP 0.2 0 0 5 10 15 20 0.8 HSMQ, HSMR InGaN 0.6 0.2 0 25 HSMM, HSMN InGaN 0.4 0 IF – FORWARD CURRENT – mA 5 10 15 20 25 IF – FORWARD CURRENT – mA 30 25 AlInGaP AlGaAs 20 GaP 15 10 5 0 0 10 20 30 40 50 60 70 80 90 TA – AMBIENT TEMPERATURE – °C IF MAX. – MAXIMUM FORWARD CURRENT – mA IF MAX. – MAXIMUM FORWARD CURRENT – mA Figure 3.
PAGE 7
100 90 RELATIVE INTENSITY 80 70 60 50 40 30 20 10 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGLE 100 RELATIVE INTENSITY 90 80 70 60 50 40 30 20 10 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGLE Figure 5. Relative intensity vs. angle. 0.4 (0.016) 10 SEC. MAX. TEMPERATURE 0.4 (0.016) 230°C MAX. 4°C/SEC. MAX. 140-160°C 0.7 (0.028) 4°C/SEC. MAX. –3°C/SEC. MAX. 0.15 (0.006) CENTERING BOARD OVER 2 MIN. TIME Figure 6.
PAGE 8
USER FEED DIRECTION CATHODE SIDE xxx xxxxx xxxxx xxxxx xxxxx xx PRINTED LABEL Figure 8. Reeling orientation. 8.0 ± 1.0 (0.315 ± 0.039) 10.50 ± 1.0 (0.413 ± 0.039) ∅ 20.20 MIN. (∅ 0.795 MIN.) ∅ 13.1 ± 0.5 (∅ 0.516 ± 0.020) 3.0 ± 0.5 (0.118 ± 0.020) 59.60 ± 1.00 (2.346 ± 0.039) 178.40 ± 1.00 (7.024 ± 0.039) 4.0 ± 0.5 (0.157 ± 0.020) 6 PS 5.0 ± 0.5 (0.197 ± 0.020) NOTE: ALL DIMENSIONS IN MILLIMETERS (INCHES). Figure 9. Reel dimensions.
PAGE 9
DIM. C (SEE TABLE 1) 2.00 ± 0.05 (0.079 ± 0.002) 4.0 (0.157) ∅1.50 (0.059) 0.20 ± 0.05 (0.008 ± 0.002) CATHODE 1.75 (0.069) 3.5 ± 0.05 (0.138 ± 0.002) DIM. A (SEE TABLE 1) 8.0 ± 0.30 (0.315 ± 0.012) 4.0 (0.157) CARRIER TAPE R 0.5 ± 0.05 (0.020 ± 0.002) DIM. B (SEE TABLE 1) USER FEED DIRECTION COVER TAPE TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER HSMx-C120 SERIES DIM. A DIM. B DIM. C ± 0.10 (0.004) ± 0.10 (0.004) ± 0.10 (0.004) 1.90 (0.075) 1.15 (0.045) Figure 10.
PAGE 10
www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site.