Datasheet

9
Intensity Bin Select (X
5
X
6
)
Individual reel will contain parts from one half bin only
X
5
Min Iv Bin
X
6
0 Full Distribution
2 2 half bins starting from X
5
1
3 3 half bins starting from X
5
1
4 4 half bins starting from X
5
1
5 5 half bins starting from X
5
1
6 2 half bins starting from X
5
2
7 3 half bins starting from X
5
2
8 4 half bins starting from X
5
2
9 5 half bins starting from X
5
2
Intensity Bin Limits
Bin ID Min (mcd) Max (mcd)
W1 1125.00 1400.00
W2 1400.00 1800.00
X1 1800.00 2240.00
X2 2240.00 2850.00
Y1 2850.00 3550.00
Y2 3550.00 4500.00
Z1 4500.00 5600.00
Z2 5600.00 7150.00
11 7150.00 9000.00
12 9000.00 11250.00
21 11250.00 14000.00
22 14000.00 18000.00
Tolerance of each bin limit = ± 12%
Moisture Sensitivity
This product is qualied as Moisture Sensitive Level 2a per
Jedec J-STD-020. Precautions when handling this moisture
sensitive product is important to ensure the reliability of
the product. Do refer to Avago Application Note AN5305
Handling of Moisture Sensitive Surface Mount Devices for
details.
A. Storage before use
- Unopen moisture barrier bag (MBB) can be stored at
<40°C/90%RH for 12 months. If the actual shelf life has
exceeded 12 months and the HIC indicates that baking
is not required, then it is safe to reow the LEDs per the
original MSL rating.
- It is not recommended to open the MBB prior to assem-
bly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read immedi-
ately upon opening of MBB.
- The LEDs must be kept at <30°C / 60%RH at all time and
all high temperature related process including solder-
ing, curing or rework need to be completed within 672
hours.
C. Control for unnished reel
- For any unuse LEDs, they need to be stored in sealed
MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected to
other high temperature processes, the PCB need to be
stored in sealed MBB with desiccant or desiccator at
<5%RH to ensure no LEDs have exceeded their oor life
of 672 hours.
E. Baking is required if:
- “10%” is Not blue and “5%” HIC indicator turns pink.
- The LEDs are exposed to condition of >30°C / 60% RH at
any time.
- The LEDs oor life exceeded 672 hours.
Recommended baking condition: 60±5°C for 20 hours.