Datasheet

7
Figure 8a. Recommended SnPb Reow Soldering Prole Figure 8b. Recommended Pb-free Reow Soldering Prole.
Figure 9. Recommended Wave Soldering Prole.
Figure 7. Soft Tip Vacuum Pick-up Tool for Extracting SMT LED Components from Carrier Tape.
Note: For detail information on reow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT
LED Indicator Components.
TEMPERATURE
TIME
10 to 20 SEC.
255 °C +5°C
-0°C
125°C +/- 25°C
217°C
3°C/SEC MAX.
MAX. 120 SEC.
-6°C/SEC MAX.
60-150 SEC.
LAMINAR WAVE
BOTTOM SIDE
OF PC BOARD
HOT AIR KNIFE
TURBULENT WAVE
FLUXING
PREHEAT
0 10 20
30
50
100
150
200
250
30 40 50
TIME – SECONDS
TEMPERATURE – C
60 70 80 90 100
TOP SIDE OF
PC BOARD
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)
PREHEAT SETTING = 150 C (100 C PCB)
SOLDER WAVE TEMPERATURE = 245 C
AIR KNIFE AIR TEMPERATURE = 390 C
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
AIR KNIFE ANGLE = 40
SOLDER: SN63; FLUX: RMA
NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY
COOLED BEFORE EXERTING MECHANICAL FORCE.
240°C MAX.
20 SEC. MAX.
3°C/SEC.
MAX.
120 SEC. MAX.
TIME
TEMPERATURE
183°C
100-150°C
–6°C/SEC.
MAX.
60-150 SEC.
3°C/SEC. MAX.
Vacuum Pick-up Tool
Soft Tip
Nozzle Inner Diameter
size: 1.0 to 1.5 mm
1.25mm
Radius Contour