Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesSMD LED PLCC4 Orange 400 mcd 120 ° 50 mA 2.2 V

Description

Avago Power PLCC-4 is an extension of our PLCC-2

SMT LEDs. The pack age can be driven at higher

current due to its superior package design. The

product is able to dissipate heat more efficiently

compared to the conventional PLCC-2 SMT LEDs. In

proportion to the increase in driving current, this

family of LEDs is able to produce higher light output

compared to the conventional PLCC-2 SMT LEDs.

These SMT LEDs have higher reliability and better perfor-

mance and are designed to work under a wide range of

environmental conditions. This higher reliability makes

them suitable for use under harsh environment and con-

ditions like automotive. In addition, they are also suitable

to be used in electronic signs and signals.

To facilitate easy pick and place assembly, the LEDs are

packed in EIA-compliant tape and reel. Every reel will be

shipped in single intensity and color bin (except for red

color), to provide close uniformity.

These LEDs are compatible with IR solder reﬂow process.

Due to the high reliability feature of these products, they

also can be mounted using through-the-wave soldering

process.

There are a variety of colors and various viewing angles

(30°, 60° and 120°) available in these SMT LEDs. Ideally,

the 30° parts are suitable for light piping where focused

intensities are required. As for the 60° and 120°, they are

most suitable for automotive interior and exterior lighting

and electronic signs applications.

CAUTION: HSMN-, HSMK-, HSMM-A40x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions

during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

HSMx-A4xx-xxxxx

SMT LED Surface Mount LED Indicator

Data Sheet

Features

• Industry standard PLCC-4

• High reliability LED package

• High brightness using AlInGaP and InGaN dice

technologies

• High optical efﬁciency

• Higher ambient temperature at the same current

possible compared to PLCC-2

• Available in full selection of colors

• Super wide viewing angle at 120˚

• Available in 8mm carrier tape on 7-inch reel

• Compatible with both IR and TTW soldering process

• JEDEC MSL 2a

Applications

• Interior automotive

– Instrument panel backlighting

– Central console backlighting

– Cabin backlighting

– Navigation and audio system

– Dome lighting

– Push button backlighting

• Exterior automotive

– Turn signals

– CHMSL

– Rear combination lamp

– Puddle light

• Electronic signs and signals

– Interior full color sign

– Variable message sign

• Ofﬁce automation, home appliances, industrial

equipment

– Front panel backlighting

– Push button backlighting

– Display backlighting

Summary of content (9 pages)

PAGE 1
HSMx-A4xx-xxxxx SMT LED Surface Mount LED Indicator Data Sheet Description Features Avago Power PLCC-4 is an extension of our PLCC‑2 SMT LEDs. The package can be driven at higher current due to its superior package design. The product is able to dissipate heat more efficiently compared to the conventional PLCC-2 SMT LEDs. In proportion to the increase in driving current, this family of LEDs is able to produce higher light output compared to the conventional PLCC-2 SMT LEDs.
PAGE 2
Package Dimensions 2.8 ± 0.2 1.9 ± 0.2 2.2 ± 0.2 0.1 TYP. A 0.8 ± 0.1 C 3.2 ± 0.2 3.5 ± 0.2 0.8 ± 0.3 C CATHODE MARKING C 0.5 ± 0.1 0.7 ± 0.1 NOTES: ALL DIMENSIONS IN mm. ELECTRICAL CONNECTION BETWEEN ALL CATHODES IS RECOMMENDED.
PAGE 3
Part Numbering System HSM x1 – A x2 x3x4 – x5x6 x7 x8x9 Packaging Option Color Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color Absolute Maximum Ratings (TA = 25°C) Parameters DC Forward Current[1] Peak Forward Current [2] HSMC/J/L/A/E 70 mA[3,4] 200 mA HSMZ/V/U 70 mA[3,4] 200 mA HSMM/K/N 30 mA 90 mA Power Dissipation 180 mW 240 mW 114 mW Reverse Voltage 5 V Junction Temperature 110°C Ope
PAGE 4
Optical Characteristics (TA = 25°C) Color Red Red Orange Orange Amber Yellow Green Emerald Green Green Cyan Blue Peak Wavelength λPEAK (nm) Typ. 635 639 621 623 609 592 594 576 568 518 502 468 Part Number HSMC HSMZ HSMJ HSMV HSML HSMA HSMU HSME HSME HSMM HSMK HSMN Dominant Wavelength λD[1] (nm) Typ. 626 630 615 617 605 590 592 575 567 525 505 470 Viewing Angle 2θ1/2[2] (Degrees) Typ. 120 120 120 120 120 120 120 120 120 120 120 120 Luminous Efficacy ηv[3] (lm/W) Typ.
PAGE 5
70 1.2 HSMC/J/L/A/E 50 HSMZ/V/U 40 30 20 10 0 HSMM/K/N 0 1 2 3 4 1.0 0.8 0.6 0.4 0.2 0 5 0 10 70 40 300°C/W 470°C/W 30 20 10 0 0 20 40 60 80 50 100 120 30 25 470°C/W 15 10 5 0 0 20 40 60 80 RELATIVE INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 -10 100 120 Figure 5b. Maximum forward current vs. ambient temperature, derated based on TJmax = 110°C (InGaN) 0.1 10 ANGLE – DEGREES 0.2 0 0 5 HSMx-Axxxx fig 7 10 15 20 25 30 35 Figure 4. Relative intensity vs.
PAGE 6
X 2.60 (0.103) X 0.40 (0.016) 1.10 (0.043) Y 0.50 (0.020) 4.50 (0.178) 1.50 (0.059) Y DIMENSIONS IN mm (INCHES). REPRESENTS ELECTRICAL CONNECTIVITY BETWEEN PADS SOLDER RESIST Figure 8a. Recommended soldering pad pattern X X 0.5 (0.020) 6.1 (0.240) 2.8 (0.110) Y 2.0 (0.079) 6.0 (0.236) 3.0 (0.118) 1.0 (0.039) 2.0 (0.079) Y DIMENSIONS IN mm (INCHES).
PAGE 7
TRAILER COMPONENT LEADER 200 mm MIN. FOR ∅180 REEL. 200 mm MIN. FOR ∅330 REEL. 480 mm MIN. FOR ∅180 REEL. 960 mm MIN. FOR ∅330 REEL. C A USER FEED DIRECTION Figure 11. Tape leader and trailer dimensions +0.1 ∅1.5 –0 4 ± 0.1 2 ± 0.05 B A 3.6 ± 0.1 1.75 ± 0.1 A 5.5 ± 0.05 C C C A 3.8 ± 0.1 +0.3 12–0.1 8 ± 0.1 ∅1 +0.1 –0 B 3.45 ± 0.1 0.229 ± 0.01 VIEW B-B VIEW A-A ALL DIMENSIONS IN mm. Figure 12. Tape dimensions USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 13.
PAGE 8
Intensity Bin Select (X5X6) Individual reel will contain parts from one half bin only. X5 Min. Iv Bin X6 0 2 3 4 5 6 7 8 9 Full Distribution 2 half bins starting from X51 3 half bins starting from X51 4 half bins starting from X51 5 half bins starting from X51 2 half bins starting from X52 3 half bins starting from X52 4 half bins starting from X52 5 half bins starting from X52 Intensity Bin Limits Bin ID N1 N2 P1 P2 Q1 Q2 R1 R2 S1 S2 T1 T2 U1 U2 V1 V2 W1 W2 Min. (mcd) 28.50 35.50 45.00 56.00 71.50 90.
PAGE 9
Forward Voltage Bin Table For HSMZ/V/U – A4xx-xxxxx only BIN VA VB VC VD VE MIN. 1.9 2.2 2.5 2.8 3.1 MAX. 2.2 2.5 2.8 3.1 3.4 Tolerance of each bin limit = ± 0.05 This product is qualified as Moisture Sensitive Level 2a per JEDEC JSTD-020. Precaution when handling this moisture sensitive product is important to ensure the reliability of the product. Refer to Avago Application Note AN 5305 Handling of Moisture Sensitive Surface Mount Devices for details. A.