Datasheet

3
Absolute Maximum Ratings at T
A
= 25°C
Parameter GaP AlInGaP Green AlInGaP Amber Units
DC Forward Current
[1]
20 20 25 mA
Power Dissipation
[2]
65 52 60 mW
Reverse Voltage (I
R
= 100mA) 5 5 5 V
LED Junction Temperature 95 95 95 °C
Operating Temperature Range -30 to 85 °C
Storage Temperature Range -40 to 85 °C
Soldering Temperature See reow soldering prole (Figure 6 & 7)
Notes:
1. Derate linearly as shown in Figure 4 for temperature above 25°C.
2. Pulse condition of 1/10 duty and 0.1 msec. width.
Optical Characteristics at T
A
= 25°C
Part Number
Luminous Intensity
I
V
[1]
(mcd)
@ 20mA
Color,
Peak Wavelength
ld (nm)
Typical
Color,
Dominant Wavelength
ld
[2]
(nm)
Typical
Viewing Angle
2q
1/2
[3]
(Degrees)
TypicalMin. Typ.
GaP HER 2.50 10.0 630 626 170
GaP Yellow 2.50 8.0 589 586 170
GaP Green 4.00 15.0 570 572 170
GaP Orange 2.50 8.0 605 604 170
AlInGaP Green 28.50 45.0 570 572 170
AlInGap Amber 28.50 55.0 595 592 170
Notes:
1. The luminous intensity I
V
is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED
package.
2. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. l
1/2
is the o-axis angle where the luminous intensity is ½ the peak intensity.
Electrical Characteristics at T
A
= 25°C
Part Number
Forward Voltage
V
F
(Volts)
[1]
@ IF = 20mA
Reverse Breakdown
VR (Volts) @ IR = 100mA
Capacitance C (pF)
@VF = 0, f = 1Mhz
Thermal Resistance
RθJ-P (°C/W)
Typ. Max. Min. Typ. Typ.
GaP HER 2.1 2.6 5 5 325
GaP Yellow 2.1 2.6 5 6 325
GaP Green 2.2 2.6 5 9 325
GaP Orange 2.2 2.6 5 7 325
AlInGaP Green 2.1 2.4 5 22 325
AlInGap Amber 1.9 2.4 5 45 325
Notes: The bicolor package contain two individual light sources of dierent color. The specications above refer to each color of a particular package.