Datasheet

3
Electrical Characteristics at T
A
= 25°C
Forward Voltage V
F
(Volts)
[1]
Reverse Breakdown Capacitance
@ I
F
= 20 mA
V
R
(Volts) @ I
R
= 100 µAC (pF), @ V
F
= 0, f = 1 MHz
Part Number Typ. Max. Min. Typ.
AlInGaP Red 1.9 2.4 5 10
InGaN Green 3.4 3.9 5 65
InGaN Blue 3.4 3.9 5 65
Note:
1. V
F
tolerance: ± 0.1 V.
Optical Characteristics at T
A
= 25°C
Peak Color, Dominant Viewing Angle Luminous
Luminous Intensity Wavelength Wavelength 2q
1/2
[3]
Efficacy
I
V
[1]
(mcd) @ 20 mA l
peak
(nm) l
d
[2]
(nm) (Degrees) h
v
(lm/W)
Part Number Min. Typ. Typical Typical Typical Typical
AlInGaP Red 28.5 85.0 637 626 140 155
InGaN Green 45.0 180.0 523 525 145 477
InGaN Blue 28.5 70.0 468 470 145 75
Notes:
1. The luminous intensity I
V
is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED
package.
2. The dominant wavelength, l
d
, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. q
1/2
is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
CAUTION:
1. The above optical
performance specifications
are valid in the case when
single LED is lit up.
2. The above product
specifications DO NOT
provide any guarantee on
color mixing, color
consistency over time, or
uniformity in luminous
intensity when more than 1
LED is lit.
3. Please refer to Avago
Technologies’ Application
Brief AB D-007 for additional
details/explanation on
driving the part in parallel
circuit.