Datasheet

3
Electrical Characteristics at T
A
= 25°C
Forward Voltage V
F
(Volts)
[1]
Reverse Breakdown Capacitance
@ I
F
= 20 mA V
R
(Volts) @ I
R
= 100 μA C (pF), @ V
F
= 0, f = 1 MHz
Part Number Typ. Max. Min. Typ.
AlInGaP Red 1.9 2.4 5 10
InGaN Green 3.4 3.9 5 65
InGaN Blue 3.4 3.9 5 65
Note:
1. VF tolerance: ± 0.1 V.
Optical Characteristics at T
A
= 25°C
Peak Color, Dominant Viewing Angle Luminous
Luminous Intensity Wavelength Wavelength 2
1/2
[3]
E cacy
I
V
[1]
(mcd) @ 20 mA 
peak
(nm) 
d
[2]
(nm) (Degrees) 
v
(lm/W)
Part Number Min. Typ. Typical Typical Typical Typical
AlInGaP Red 28.5 85.0 637 626 140 155
InGaN Green 45.0 180.0 523 525 145 477
InGaN Blue 28.5 70.0 468 470 145 75
Notes:
1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the LED
package.
2. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. q1/2 is the o -axis angle where the luminous intensity is 1/2 the peak intensity.
CAUTION:
1. The above optical performance speci cations are valid in the case when single LED is lit up.
2. The above product speci cations DO NOT provide any guarantee on color mixing, color consistency over time, or
uniformity in luminous intensity when more than 1 LED is lit.
3. Please refer to Avago Technologies’ Application Brief AB D-007 for additional details/explanation on driving the part
in parallel circuit.