Datasheet

4
AlInGaP Red Color Bin Limits
[1]
Tolerance : ±15%
Notes:
1. Bin categories are established for classi-cation of products. Products
may not be available in all categories. Please contact your Avago
Technologies representative for information on current available
bins.
Light Intensity (I
V
) Bin Limits
[1]
InGaN Blue Color Bin Limits
[1]
InGaN Green Color Bin Limits
[1]
AlInGaP Green Color Bin Limits
[1]
Notes:
1. Bin categories are established for classi-cation of products. Products
may not be available in all categories. Please contact your Avago
Technologies representative for information on current available
bins.
Bin ID
Intensity (mcd)
Minimum Maximum
A 0.11 0.18
B 0.18 0.29
C 0.29 0.45
D 0.45 0.72
E 0.72 1.10
F 1.10 1.80
G 1.80 2.80
H 2.80 4.50
J 4.50 7.20
K 7.20 11.20
L 11.20 18.00
M 18.00 28.50
N 28.50 45.00
P 45.00 71.50
Q 71.50 112.50
R 112.50 180.00
S 180.00 285.00
T 285.00 450.00
Bin ID
Dom. Wavelength (nm)
Minimum Maximum
-- 620.0 635.0
Bin ID
Dom. Wavelength (nm)
Minimum Maximum
A 561.5 564.5
B 564.5 567.5
C 567.5 570.5
D 570.5 573.5
E 573.5 576.5
Bin ID
Dom. Wavelength (nm)
Minimum Maximum
A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Bin ID
Dom. Wavelength (nm)
Minimum Maximum
A 460.0 465.0
B 465.0 470.0
C 470.0 475.0
D 475.0 480.0
CAUTION:
1. The above optical performance specications are valid in the case
when single LED is lit up.
2. The above product specications DO NOT provide any guarantee on
color mixing, color consistency over time, or uniformity in luminous
intensity when more than 1 LED is lit.
3. Please refer to Avago Technologies Application Brief AB D-007
for additional details / explanation on driving the part in parallel
circuit.
Tolerance : ±1nm
Tolerance : ±1nm
Tolerance : ±1nm
Tolerance : ±1nm