Datasheet

3
Absolute Maximum Ratings at T
A
= 25°C
Notes:
1. Applies when single LED is lit up.
2. Applies when all 3 LEDs are lit up simultaneously.
3. Derate linearly as shown in Figure 4.
4. Drive currents above 5 mA are recommended for best long term performance.
Notes:
1. The luminous intensity I
V
is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the
LED package.
2. The dominant wavelength, λ
d
, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. θ
1/2
is the o-axis angle where the luminous intensity is ½ the peak intensity.
Parameter AlInGaP Red AlInGaP Green InGaN Green InGaN Blue Units
DC Forward Current
[1,3]
20 20 20 20 mA
Power Dissipation
[1]
48 52 78 78 mW
DC Forward Current
[2]
15 15 15 15 mA
Power Dissipation
[2
] 36 39 59 59 mW
Reverse Voltage (I
R
= 100mA) 5 5 5 5 V
LED Junction Temperature 95 95 95 95 °C
Operating Temperature Range -30 to +85 °C
Storage Temperature Range -40 to +85 °C
Soldering Temperature See IR soldering prole (Figure 6 & 7)
Part Number
Forward Voltage
VF (Volts)
[1]
@ I
F
= 20mA
Reverse Breakdown
V
R
(Volts)
@ I
R
= 100mA
Capacitance
C(pF),
@ V
F
= 0, f = 1MHz
Thermal Resistance
Rq
J-PIN
(°C/W)
Typ. Max. Min. Typ. Typ.
AlInGaP Red 1.9 2.0 5 12 550
AlInGaP Green 2.0 2.6 5 15 300
InGaN Green 3.4 3.9 5 65 400
InGaN Blue 3.4 3.9 5 65 400
Part Number
Luminous Intensity
I
V
[1]
(mcd)
@ 20mA
Peak Wavelength
l
peak
(nm)
Color, Dominant
Wavelength
l
d
[2]
(nm)
Viewing
Angle
2q
1/2
[3]
(Degrees)
Luminous
Ecacy
h
V
(lm/W)
Min. Typ. Typical Typical Typical Typical
AlInGaP Red 28.5 80.0 637 626 120 155
AlInGaP Green 18.0 50.0 570 572 125 570
InGaN Green 71.5 170.0 523 525 125 443
InGaN Blue 28.5 60.0 468 470 125 89
Electrical Characteristics at T
A
= 25°C
Optical Characteristics at T
A
= 25°C
Notes:
1.Vf tolerance : ±0.1V