Datasheet

Convective IR Reflow Soldering

For more information on solder-

ing, refer to Application Note

1060, Surface Mounting SMT

LED Indicator Components.

Storage Condition: 5 to 30˚ C @ 60%

RH max.

Baking is required under the con-

dition:

a) Humidity Indicator Card is

>10% when read at 23 ± 5°C

b) Device exposed to factory

conditions <30°C/60% RH

more than 672 hours.

Baking recommended condition:

60 ± 5°C for 20 hours.

Figure 17. Tape leader and trailer dimensions.

END START

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MOUNTED WITH

COMPONENTS

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MINIMUM OF

230 mm

(9.05 INCH)

MAY CONSIST

OF CARRIER

AND/OR

COVER TAPE.

For product information and a complete list of distributors, please go to our website: www.avagotech.com

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.

AV02-0976EN January 8, 2008