Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesSMD LED PLCC4 Amber 3300 mcd 60 ° 50 mA 2.2 V

HSMx-A46x-xxxxx

SMT LED Surface Mount LED Indicator

Data Sheet

Description

The Power PLCC-4 SMT LED with Lens are high perfor-

mance PLCC-4 package size SMT LEDs targeted mainly

in Automotive & Electronics Signs and Signals (ESS)

markets. These top-mount single-chip packages with

focused radiation oer high brightness in beam direc-

tion and are excellent for interior automotive, indoor

and outdoor sign and industrial applications. With ad-

ditional lens in 50° variants, these products are espe-

cially tting to applications for Mono-color Text Display,

CHMSL and displays.

The PLCC-4 package family is able to dissipate heat bet-

ter compared to the PLCC-2 packages. In proportion

to this increase in driving current, this family of LEDs is

able to produce higher light output compared to the

conventional PLCC-2 SMT LEDs.

As an extension of the standard at top PLCC-4 SMT

LEDs, the Power PLCC-4 with Lens device is able to pro-

vide focused beams within narrow viewing angles (50°)

meeting the market’s requirements for focused radia-

tion and high brightness in beam directions.

The Power PLCC-4 SMT LED with 50° is ideal for panel,

push button, general backlighting, automotive interior

& exterior (cluster backlighting, side repeaters, brake

lights), sign and symbol illumination, oce equipment,

industrial equipment and home appliances applica-

tions. This package design coupled with careful selec-

tion of component materials allow the Power PLCC-4

SMT LED with Lens to perform with higher reliability in

a larger temperature range -40°C to 100°C. This high re-

liability feature is crucial to allow the Power PLCC-4 SMT

LED with Lens to do well in harsh environments such as

its target Automotive & ESS markets.

Features

• Industry standard PLCC-4

• High reliability LED package

• High brightness using AlInGaP and InGaN dice tech-

nologies

• High optical eciency

• Narrow Viewing angle at 50°

• Available in 8mm carrier tape on 7-inch reel

Applications

• Interior automotive

– Instrument panel backlighting

– Central console backlighting

– Cabin backlighting

– Navigation and audio system

– Dome lighting

– Push button backlighting

• Exterior automotive

– Turn signals

– CHMSL

– Rear combination lamp

– Side repeaters

• Oce automation, home appliances, industrial

equipment

– Front panel backlighting

– Push button backlighting

– Display backlighting

Summary of content (10 pages)

PAGE 1
HSMx-A46x-xxxxx SMT LED Surface Mount LED Indicator Data Sheet Description Features The Power PLCC-4 SMT LED with Lens are high performance PLCC-4 package size SMT LEDs targeted mainly in Automotive & Electronics Signs and Signals (ESS) markets. These top-mount single-chip packages with focused radiation offer high brightness in beam direction and are excellent for interior automotive, indoor and outdoor sign and industrial applications.
PAGE 2
Package Drawing 3.87 max 2.8±0.2 2.2±0.2 3.2±0.2 0.80±0.1 0.1TYP 3.5±0.2 0.8±0.3 Package marking Pin HSMx-A46x Lead Configuration 1 Cathode 2 Anode 3 Cathode 4 Cathode 0.7±0.1 Note: 1. All Dimensions in millimeters. 2. Terminal Finish: Ag plating 3. Electrical connection between all cathode is recommended Figure 1. Package Drawing Table 1. Device Selection Guide Luminous Intensity, lV [1] (mcd) Color Part Number Min. Iv (mcd) Typ. Iv (mcd) Max.
PAGE 3
Table 2. Absolute Maximum Ratings (TA = 25 °C) Parameters HSMA/C/L/J HSMM/N DC Forward Current [1] 70 mA 30 mA Peak Forward Current [2] 200 mA 90 mA Power Dissipation 180 mW 140 mW Reverse Voltage 5V Junction Temperature 110°C Operating Temperature -40°C to +100°C Storage Temperature -40°C to +100°C Notes: 1. Derate Linearly as shown in Figure 7. 2. Duty Factor = 10%, Frequency = 1kHz Table 3.
PAGE 4
RELATIVE INTENSITY 1 0.9 InGaN Blue 0.8 InGaN Green 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 AllnGaP Red Orange AllnGaP Orange AllnGaP Amber AllnGaP Red 480 530 580 630 WAVELENGTH - nm 680 730 780 Figure 2. Relative Intensity Vs. Wavelength 1.6 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 50 mA) 70 60 HSMA/C/J/L 50 40 30 HSMM/N 20 10 0 0 1 2 3 FORWARD VOLTAGE - V 4 Figure 3. Forward Current Vs. Forward Voltage RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 30 mA) 1 0.8 0.6 0.4 0.
PAGE 5
MAXIMUM FORWARD CURRENT - mA Rθ JA = 300°C/W Rθ JA = 350°C/W 40 Rθ JA = 470°C/W 20 0 20 40 60 80 AMBIENT TEMPERATURE - °C 100 60 40 20 0 120 30 Rθ JA = 300°C/W Rθ JA = 350°C/W Rθ JA = 470°C/W 15 10 5 0 120 MAXIMUM FORWARD CURRENT - mA MAXIMUM FORWARD CURRENT - mA 35 20 0 20 40 60 80 100 AMBIENT TEMPERATURE - °C 610 AlInGaP Orange 605 600 595 AlInGaP Amber 590 585 0 10 20 30 40 50 60 FORWARD CURRENT - mA Figure 8a. Dominant Wavelength Vs.
PAGE 6
1 0.9 0.2 NORMALIZED INTENSITY FORWARD VOLTAGE SHIFT - V 0.3 InGaN 0.1 AllnGaP 0 -0.1 -0.2 -0.3 -50 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 -25 0 25 50 75 JUNCTION TEMPERATURE - °C 0 -90 100 Figure 9. Forward Voltage Shift Vs. Temperature -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 10. Radiation Pattern TEMPERATURE 10 to 20 SEC. 255 ˚C +5˚C -0˚C 217˚C -6˚C/SEC MAX. 3˚C/SEC MAX. 125˚C +/- 25˚C 60-150 SEC. MAX. 120 SEC. TIME Figure 11a. Recommended SnPb Reflow Soldering Profile.
PAGE 7
Figure 13. Soft Tip Vacuum Pick-up Tool for extracting SMT LED Components from Carrier Tape TRAILER 200 mm MIN. FOR ∅ 180 REEL. 200 mm MIN. FOR ∅ 330 REEL. COMPONENT LEADER 480 mm MIN. FOR ∅ 180 REEL. 960 mm MIN. FOR ∅ 330 REEL. C A USER FEED DIRECTION Figure 14. Tape Leader and Trailer Dimensions Figure 15.
PAGE 8
USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 16. Reeling Orientation Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - Unopen moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months.
PAGE 9
Intensity Bin Select (X5X6) Color Bin Select (X7) Individual reel will contain parts from one half bin only Individual reel will contain parts from one full bin only.
PAGE 10
Color Bin Limits Packaging Option (X8 X9) Blue Min. (nm) Max. (nm) Option Test Current Package Type Reel Size A 460.0 465.0 M1 50mA Top Mount 7 B 465.0 470.0 M2 30mA Top Mount 7 C 470.0 475.0 D 475.0 480.0 VF Bin Limits For HSMA/C/J/L-A46x-xxxxx only Green Min. (nm) Max. (nm) Bin ID Min. Max. A 515.0 520.0 VA 1.9 2.2 B 520.0 525.0 VB 2.2 2.5 C 525.0 530.0 D 530.0 535.0 Tolerance of each bin limit = ±0.1V For HSMM/N-A46x-xxxxx only Amber Min.