Datasheet

9
(J) 12 mm Tape and Reel, Z-Bend Lead
Embossed Carrier All Dimensions
Tape Dimensions Are in Millimeters
Per ANSI/EIA (Inches).
Standard RS-481.
Yoke and
Gull Wing Dome Gull Wing Flat Top Yoke Dome Z-Bend Dome Z-Bend Flat Top
D 1.55 (0.061 ± 0.002) Dia. 1.55 (0.061 ± 0.002) Dia. 1.55 (0.061 ± 0.002) Dia. 1.50 + 0.10 1.50 + 0.10
(0.059 + 0.004) Dia. (0.059 + 0.004) Dia.
D
1
1.0 (0.039) Dia. Min. N/A (No Push Pin Hole) N/A (No Push Pin Hole) 1.50 + 0.25 N/A (No Push Pin Hole)
(0.059 + 0.010)
D
2
20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min.
E 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069)
F
K
0
3.05 ± 0.1 (0.120) Typ. 2.54 ± 0.1 (0.100) Typ. 3.05 ± 0.1 (0.120) Typ. 2.97 ± 0.1 (0.117) Typ. 3.05 ± 0.1 (0.120) Typ.
P 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ.
P
0
4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ.
P
2
2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002)
t 0.3 (0.012) Typ. 0.3 (0.012) Typ. 0.3 (0.012) Typ. 0.305 ± 0.013 0.305 ± 0.013
(0.0120 ± 0.0005) (0.0120 ± 0.0005)
W 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012)
Reel Dimensions All Dimensions
Per ANSI/EIA Are in Millimeters
Standard RS-481. (Inches).
7 inch Reel 13 Inch Reel
A 178.0 ± 2.0 (7.0 ± 0.08) Dia. 330 (12.9) Dia. Max.
C 13.0 (0.512) Dia. Typ. 13.0 (0.512) Dia. Typ.
N 50.0 (1.97) Min. 100.0 (3.93) Min.
T 18.4 (0.72) mMax. 18.4 (0.72) Max.
5.50 ± 0.05 (0.217 ± 0.002)