Datasheet

2
Device Selection Guide
Part Number
Color and Dominant Wavelength
ld (nm) Typ
Luminous Intensity Iv
(mcd) at 20 mA-Min
Luminous Intensity Iv
(mcd) at 20 mA-Max
HLMP-LD63-SWTZZ Red 630 660 1660
HLMP-LM63-X20ZZ Green 525 1660 4200
HLMP-LB63-PT0ZZ Blue 470 380 960
Tolerance for each intensity limit is ± 15%.
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
Absolute Maximum Ratings, T
A
= 25°C
Parameter Red Blue and Green Unit
DC Forward Current
[1]
50 30 mA
Peak Forward Current 100
[2]
100
[3, 4]
mA
Power Dissipation 130 111 mW
Reverse Voltage 5 (I
R
= 100 μA) 5 (I
R
= 10 μA) V
LED Junction Temperature 130 110 °C
Operating Temperature Range -40 to +100 -40 to +85 °C
Storage Temperature Range -40 to +120 -40 to +100 °C
Notes:
1. Derate linearly as shown in Figure 2 and Figure 8.
2. Duty Factor 30%, frequency 1kHz.
3. Duty Factor 10%, frequency 1KHz.
4. For long term performance with minimal light output degradation, drive current below 15mA is recommended for Blue LED.
Part Numbering System
HLMP- L x 63 – x x x x x
Packaging Option
ZZ: Flexi Ammopacks
Color Bin Selection
0: Open distribution
T: Red Color, Vf maximum =2.6V
Maximum Intensity Bin
0: No maximum intensity limit
Minimum Intensity Bin
Refer to Device Selection Guide.
Color
B: Blue 470
D: Red 630
M: Green 525
Package
L: 4mm Standard Oval 50° x100°