Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Blue Oval 3 x 4 mm 605 mcd 50 °, 100 ° 20 mA 3.2 V

HLMP-LD63, HLMP-LM63, HLMP-LB63

Precision Optical Performance Red, Green and Blue

New 4mm Standard Oval LEDs

Data Sheet

Description

These Precision Optical Performance Oval LEDs are spe-

cically designed for full color/video and passenger infor-

mation signs. The oval shaped radiation pattern and high

luminous intensity ensure that these devices are excellent

for wide eld of view outdoor applications where a wide

viewing angle and readability in sunlight are essential.

Features

• Well dened spatial radiation pattern

• High brightness material

• Available in red, green and blue color.

Red AlInGaP 630nm

Green InGaN 525nm

Blue InGaN 470nm

• Superior resistance to moisture

• Stando Package

• Typical viewing angle 50° x100°

Applications

• Full color signs

Package Dimensions

Notes:

All dimensions in millimeters (inches).

Tolerance is ± 0.20mm unless other specied

For Blue and Green if heat sinking application is required, the terminal for heat sink is anode.

Caution: InGaN devices are Class 1C HBM ESD sensitive per JEDEC Standard. Please observe appropriate

precautions during handling and processing. Refer to Application Note AN-1142 for additional details.

Summary of content (11 pages)

PAGE 1
HLMP-LD63, HLMP-LM63, HLMP-LB63 Precision Optical Performance Red, Green and Blue New 4mm Standard Oval LEDs Data Sheet Description Features These Precision Optical Performance Oval LEDs are specifically designed for full color/video and passenger information signs. The oval shaped radiation pattern and high luminous intensity ensure that these devices are excellent for wide field of view outdoor applications where a wide viewing angle and readability in sunlight are essential.
PAGE 2
Device Selection Guide Part Number Color and Dominant Wavelength ld (nm) Typ Luminous Intensity Iv (mcd) at 20 mA-Min Luminous Intensity Iv (mcd) at 20 mA-Max HLMP-LD63-SWTZZ Red 630 660 1660 HLMP-LM63-X20ZZ Green 525 1660 4200 HLMP-LB63-PT0ZZ Blue 470 380 960 Tolerance for each intensity limit is ± 15%. Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package.
PAGE 3
Electrical / Optical Characteristics, TA = 25°C Parameter Forward Voltage Red Green Blue Reverse Voltage Red Green & blue Symbol Min. Typ. Max. Units Test Conditions VF 2.0 2.7 2.7 2.3 3.2 3.2 2.6{1] 3.7 3.
PAGE 4
AlInGaP Red MAX. - MAXIMUM FORWARD CURRENT - mA 0.5 0 550 600 650 IF RELATIVE INTENSITY 1.0 700 60 50 40 30 20 10 0 0 WAVELENGTH - nm 2.5 40 2.0 RELATIVE INTENSITY 50 30 20 10 0 0 0.5 1.0 1.5 2.0 V F - FORWARD VOLTAGE - V Figure 3. Forward Current vs Forward Voltage 100 Figure 2. Maximum Forward Current vs Ambient Temperature 2.5 3.0 (NORMALIZED AT 20 mA) I F - FORWARD CURRENT - mA Figure 1. Relative Intensity vs Wavelength 20 40 60 80 TA - AMBIENT TEMPERATURE - o C 1.
PAGE 5
InGaN Blue and Green 1.0 35 RELATIVE INTENSITY Green Blue 0.8 FORWARD CURRENT - mA 0.9 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 430 480 530 WAVELENGTH - nm 580 630 5 0 0 1 30 IF max. - MAXIMUM FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY - NORMALIZED AT 20mA DOMINANT WAVELENGTH SHIFT- nm 10 1.4 1.2 1 0.8 Green 0.6 0.4 0.2 0 Blue 0 5 30 3 Blue 2 1 0 5 10 15 25 20 15 10 5 20 0 20 40 60 80 Figure 8.
PAGE 6
1 0.8 0.6 0.4 0.2 -90 -60 -30 0 0 30 60 90 Figure 10. Radiation pattern-Major Axis 1 0.8 0.6 0.4 0.2 -90 -60 -30 0 0 30 60 90 Figure 11. Radiation pattern-Minor Axis Intensity Bin Limit Table (1.
PAGE 7
Red Color Range Min Dom Max Dom Xmin Ymin Xmax Ymax 622 634 0.6904 0.3094 0.6945 0.2888 0.6726 0.3106 0.7135 0.2865 Tolerance for each bin limit is ± 0.5nm. Green Color Bin Table Bin Min Dom Max Dom Xmin Ymin Xmax Ymax 1 520.0 524.0 0.0743 0.8338 0.1856 0.6556 0.1650 0.6586 0.1060 0.8292 0.1060 0.8292 0.2068 0.6463 0.1856 0.6556 0.1387 0.8148 0.1387 0.8148 0.2273 0.6344 0.2068 0.6463 0.1702 0.7965 0.1702 0.7965 0.2469 0.6213 0.2273 0.6344 0.2003 0.
PAGE 8
Avago Color Bin on CIE 1931 Chromaticity Diagram 1.000 0.800 1 2 3 4 Green 5 Y 0.600 0.400 Red 0.200 5 4 3 2 0.000 0.000 0.100 Blue 1 0.200 0.300 0.400 0.500 0.600 0.700 0.800 X Relative Light Output vs Junction Temperature Relative Light Output vs Junction Temperature 1.6 RELATIVE LIGHT OUTPUT (NORMALIZED AT T J = 25˚C 1.4 Blue 1.2 1 0.8 0.6 Green Red 0.4 0.
PAGE 9
Precautions: Avago Technologies LED configuration Lead Forming: • The leads of an LED lamp may be performed or cut to length prior to insertion and soldering on PC board. • If lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress that induced into the LED package. Otherwise, cut the leads to applicable length after soldering process at room temperature.
PAGE 10
Recommended Wave Soldering Profile LAMINAR WAVE TURBULENT WAVE HOT AIR KNIFE 250 TEMPERATURE - °C 200 TOP SIDE OF PC BOARD BOTTOM SIDE OF PC BOARD 150 CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) PREHEAT SETTING = 150°C (100°C PCB) SOLDER WAVE TEMPERATURE = 245°C ± 5˚C AIR KNIFE AIR TEMPERATURE = 390°C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) AIR KNIFE ANGLE = 40 SOLDER: SN63; FLUX: RMA LEAD FREE SOLDER 96.5%Sn; 3.0%Ag; 0.
PAGE 11
Packaging Box for Ammo Packs Note: For InGaN device, the ammo pack packaging box contain ESD logo For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved.