HLMP-1301 T-1 (3 mm) Diffused LED Lamps Data Sheet HLMP-1301, HLMP-1401, HLMP-1503, HLMP-K401, HLMP-K600 Description This family of T-1 lamps is widely used in general purpose indicator applications. Diffusants, tints, and optical design are balanced to yield superior light output and wide viewing angles. Several intensity choices are available in each color for increased design flexibility.
Selection Guide Material Color Part Number Luminous Intensity Iv (mcd) at 10 mA Min. Max. GaAsP on GaP Red HLMP-1301 3.4 – HLMP-1301-E00xx 3.4 – HLMP-1301-FG0xx 5.4 17.2 HLMP-1301-G00xx 8.6 – HLMP-1301-GH0xx 8.6 27.6 HLMP-1401 2.2 – HLMP-1401-D00xx 3.6 – HLMP-1401-E00xx 5.7 – HLMP-1401-EF0xx 5.7 18.4 HLMP-1401-EFBxx 5.7 18.4 HLMP-K401 2.1 – HLMP-K401-E00xx 3.4 – HLMP-K401-EF0xx 3.4 10.8 HLMP-K401-FGDxx 5.4 17.2 HLMP-1503 1.0 – HLMP-1503-C00xx 2.
Part Numbering System HLMP - x x xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02, Bx: Tape & Reel, Straight Leads A1: Right Angle Housing, Uneven Leads A2: Right Angle Housing, Even Leads Dx, EE: Ammo Pack, Straight Leads R4: Tape & Reel, Counter Clockwise Vx: Ammo Pack, Horizontal Leads FG: Products need inventory control for Customer IDI Color Bin Options 0: Full Color Bin Distribution B: Color Bins 2 & 3 only D: Color Bins 4 & 5 only Maximum Iv Bin Options 0: Open (no max.
Absolute Maximum Ratings at TA = 25°C Parameter HER/Orange Yellow Green Units Peak Forward Current 90 60 90 mA Average Forward Current[1] 25 20 25 mA DC Current[2] 30 20 30 mA Reverse Voltage (IR = 100 µA) 5 5 5 V Transient Forward Current[4] (10 µsec Pulse) 500 500 500 mA LED Junction Temperature 110 110 110 °C Operating Temperature Range -55 to +100 -55 to +100 -20 to +100 °C Storage Temperature Range -55 to +100 Notes: 1.
Electrical Characteristics at TA = 25°C Device HLMP- Min. Typ. Description 2q1/2 Included Angle Between Half Luminous Intensity Points All 60 Deg.
RELATIVE INTENSITY 1.0 ORANGE EMERALD GREEN AlGaAs RED HIGH PERFORMANCE GREEN TA = 25° C HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 700 750 WAVELENGTH – nm Figure 1. Relative intensity vs. wavelength. T-1 High Efficiency Red, Orange Diffused Lamps Figure 2. Forward current vs. forward voltage characteristics. Figure 3. Relative luminous intensity vs. DC forward current. Figure 5. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings). Figure 6.
T-1 Yellow Diffused Lamps Figure 7. Forward current vs. forward voltage characteristics. Figure 8. Relative luminous intensity vs. forward current. Figure 10. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings). Figure 11. Relative luminous intensity vs. angular displacement. 7 Figure 9. Relative efficiency (luminous intensity per unit current) vs. peak current.
T-1 Green/Emerald Green Diffused Lamps Figure 12. Forward current vs. forward voltage characteristics. Figure 13. Relative luminous intensity vs. forward current. Figure 15. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings). Figure 16. Relative luminous intensity vs. angular displacement. 8 Figure 14. Relative efficiency (luminous intensity per unit vurrent) vs. peak LED current.
Intensity Bin Limits Color Red/Orange Yellow 9 Bin Intensity Range (mcd) Min. Max. D E F G H I J K L M N O P Q R S T U V W X Y Z C D E F G H I J K L M N O P Q R S T U V W 2.4 3.8 6.1 9.7 15.5 24.8 39.6 63.4 101.5 162.4 234.6 340.0 540.0 850.0 1200.0 1700.0 2400.0 3400.0 4900.0 7100.0 10200.0 14800.0 21400.0 2.5 4.0 6.5 10.3 16.6 26.5 42.3 67.7 108.2 173.2 250.0 360.0 510.0 800.0 1250.0 1800.0 2900.0 4700.0 7200.0 11700.0 18000.0 3.8 6.1 9.7 15.5 24.8 39.6 63.4 101.5 162.4 234.6 340.0 540.0 850.
Intensity Bin Limits, continued Color Green/ Emerald Green Bin Intensity Range (mcd) Min. Max. A 1.1 1.8 B 1.8 2.9 C 2.9 4.7 D 4.7 7.6 E 7.6 12.0 F 12.0 19.1 G 19.1 30.7 H 30.7 49.1 I 49.1 78.5 J 78.5 125.7 K 125.7 201.1 L 201.1 289.0 M 289.0 417.0 N 417.0 680.0 O 680.0 1100.0 P 1100.0 1800.0 Q 1800.0 2700.0 R 2700.0 4300.0 S 4300.0 6800.0 T 6800.0 10800.0 U 10800.0 16000.0 V 16000.0 25000.0 W 25000.0 40000.
Color Categories Color Emerald Green Green Yellow Orange Min. 9 522.5 555.5 8 555.5 558.5 7 558.5 561.5 6 561.5 564.5 6 561.5 564.5 5 564.5 567.5 4 567.5 570.5 3 570.5 573.5 2 573.5 576.5 1 582.0 584.5 3 584.5 587.0 2 587.0 589.5 4 589.5 592.0 5 592.0 593.0 1 597.0 599.5 2 599.5 602.0 3 602.0 604.5 4 604.5 607.5 5 607.5 610.5 6 610.5 613.5 7 613.5 616.5 8 616.5 619.5 Tolerance for each bin limit is ± 0.5 nm. 11 Lambda (nm) Max.
Mechanical Option Matrix Mechanical Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag 01 Tape & Reel, crimped leads, minimum increment 1800 pcs/bag 02 Tape & Reel, straight leads, minimum increment 1800 pcs/bag A1 Right Angle Housing, uneven leads, minimum increment 500 pcs/bag A2 Right Angle Housing, even leads, minimum increment 500 pcs/bag BG Tape & Reel, straight leads in 2K increment BJ Tape & Reel, straight leads in 2K increment DD Ammo Pack, straight leads in 2K
Precautions Lead Forming • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering into PC board. • If lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress induced to LED package. Otherwise, cut the leads of LED to length after soldering process at room temperature. The solder joint formed will absorb the mechanical stress of the lead cutting from traveling to the LED chip die attach and wirebond.
For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved.
