Datasheet

7
Intensity Bin Limit Table (1.2: 1 Iv Bin Ratio)
Bin
Intensity (mcd) at 20 mA
Min Max
Q 460 550
R 550 660
S 660 800
T 800 960
U 960 1150
V 1150 1380
W 1380 1660
X 1660 1990
Y 1990 2400
Z 2400 2900
1 2900 3500
2 3500 4200
3 4200 5040
Tolerance for each bin limit is ± 15%
V
F
Bin Table (V at 20mA)
Bin ID Min Max
VD 1.8 2.0
VA 2.0 2.2
VB 2.2 2.4
Notes:
1. Tolerance for each bin limit is ±0.05V
2. V
F
binning only applicable to Red color.
Red Color Range
Min
Dom
Max
Dom Xmin Ymin Xmax Ymax
618 630 0.6872 0.3126 0.6890 0.2943
0.6690 0.3149 0.7080 0.2920
Tolerance for each bin limit is ± 0.5nm
Green Color Bin Table
Bin
Min
Dom
Max
Dom Xmin Ymin Xmax Ymax
1 520.0 524.0 0.0743 0.8338 0.1856 0.6556
0.1650 0.6586 0.1060 0.8292
2 524.0 528.0 0.1060 0.8292 0.2068 0.6463
0.1856 0.6556 0.1387 0.8148
3 528.0 532.0 0.1387 0.8148 0.2273 0.6344
0.2068 0.6463 0.1702 0.7965
4 532.0 536.0 0.1702 0.7965 0.2469 0.6213
0.2273 0.6344 0.2003 0.7764
5 536.0 540.0 0.2003 0.7764 0.2659 0.6070
0.2469 0.6213 0.2296 0.7543
Tolerance for each bin limit is ± 0.5nm.
Blue Color Bin Table
Bin
Min
Dom
Max
Dom Xmin Ymin Xmax Ymax
1 460.0 464.0 0.1440 0.0297 0.1766 0.0966
0.1818 0.0904 0.1374 0.0374
2 464.0 468.0 0.1374 0.0374 0.1699 0.1062
0.1766 0.0966 0.1291 0.0495
3 468.0 472.0 0.1291 0.0495 0.1616 0.1209
0.1699 0.1062 0.1187 0.0671
4 472.0 476.0 0.1187 0.0671 0.1517 0.1423
0.1616 0.1209 0.1063 0.0945
5 476.0 480.0 0.1063 0.0945 0.1397 0.1728
0.1517 0.1423 0.0913 0.1327
Tolerance for each bin limit is ± 0.5nm
Note:
1. All bin categories are established for classication of products.
Products may not be available in all bin categories. Please contact
your Avago representative for further information.