Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Green Oval 3.8 x 5.2 mm 5040 mcd 40 °, 100 ° 20 mA 3.2 V

Package Dimensions

CAUTION: INGaN devices are Class 1C HBM ESD sensitive per JEDEC Standard. Please observe appropriate

precautions during handling and processing. Refer to Application Note AN – 1142 for additional details.

HLMP-HG65, HLMP-HM65, HLMP-HB65

Precision Optical Performance Red Green and Blue

New 5mm Standard Oval LEDs

Data Sheet

Notes:

All dimensions in millimeters (inches).

Tolerance is ± 0.20mm unless other specied

Description

These Precision Optical Performance Oval LEDs are spe-

cically designed for full color/video and passenger infor-

mation signs. The oval shaped radiation pattern and high

luminous intensity ensure that these devices are excellent

for wide eld of view outdoor applications where a wide

viewing angle and readability in sunlight are essential.

The package epoxy contains both UV-A and UV-B inhibi-

tors to reduce the eects of long term exposure to direct

sunlight.

Applications

• Full color signs

Features

• Well dened spatial radiation pattern

• High brightness material

• Available in Red, Green and Blue color

Red AlInGaP 626 nm

Green InGaN 525nm

Blue InGaN 470nm

• Superior resistance to moisture

• Stando Package

• Tinted and diused

• Typical viewing angle 40° x 100°

10.80 ± 0.50

0.425 ± 0.020

7.00 ± 0.20

0.276 ± 0.008

5.20 ± 0.20

0.205 ± 0.008

1.30 ± 0.20

0.051 ± 0.008

SQ TYP.

1.00

0.039

2.54 ± 0.30

0.10 ± 0.012

MIN.

1.02 MAX.

0.040 MAx.

CATHODE LEAD

0.70

0.028

MAX.

NOTE:

1. MEASURED AT BASE OF LENS.

0.50 ± 0.10

0.020 ± 0.004

3.80 ± 0.20

0.150 ± 0.008

24.00 MIN.

0.945 MIN.

Summary of content (12 pages)

PAGE 1
HLMP-HG65, HLMP-HM65, HLMP-HB65 Precision Optical Performance Red Green and Blue New 5mm Standard Oval LEDs Data Sheet Description Features These Precision Optical Performance Oval LEDs are specifically designed for full color/video and passenger information signs. The oval shaped radiation pattern and high luminous intensity ensure that these devices are excellent for wide field of view outdoor applications where a wide viewing angle and readability in sunlight are essential.
PAGE 2
Device Selection Guide Part Number Color and Dominant Wavelength ld (nm) Typ Luminous Intensity Iv (mcd) at 20 mA-Min Luminous Intensity Iv (mcd) at 20 mA-Max HLMP-HG65-VY0xx Red 626 1150 2400 HLMP-HM65-Y30xx Green 525 1990 5040 HLMP-HB65-QU0xx Blue 470 460 1150 Tolerance for each intensity limit is ± 15%. Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package.
PAGE 3
Absolute Maximum Ratings TA = 25°C Parameter Red Green and Blue Unit DC Forward Current [1] 50 30 mA Peak Forward Current 100 [2] 100 [3] mA Power Dissipation 120 116 mW Reverse Voltage 5 (IR = 100 μA) 5 (IR = 10 μA) V LED Junction Temperature 130 110 °C Operating Temperature Range -40 to +100 -40 to +85 °C Storage Temperature Range -40 to +100 -40 to +100 °C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty Factor 30%, frequency 1KHz. 3.
PAGE 4
1 50 0.8 40 FORWARD CURRENT - mA RELATIVE INTENSITY AlInGaP Red 0.6 0.4 0.2 0 550 600 650 WAVELENGTH - nm I F MAX . - MAXIMUM FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2 1.5 1 0.5 10 20 30 DC FORWARD CURRENT - mA Figure 3. Relative Intensity vs Forward Current 10 0 0.5 1 1.5 FORWARD VOLTAGE - V 2 2.5 40 60 80 TA- AMBIENT TEMPERATURE - C- 100 Figure 2. Forward Current vs Forward Voltage 2.5 0 20 0 700 Figure 1.
PAGE 5
30 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 25 BLUE FORWARD CURRENT - mA RELATIVE INTENSITY InGaN Blue and Green GREEN 430 480 530 580 630 20 15 10 5 0 0 1 WAVELENGTH - nm Figure 5. Relative Intensity vs Wavelength 1.2 1 GREEN 0.8 0.6 0 BLUE 0 5 10 15 20 DC FORWARD CURRENT - mA Figure 7. Relative Intensity vs Forward Current I F max - MAXIMUM FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZE AT 20 mA) 1.4 0.2 3 4 V Figure 6.
PAGE 6
DOMINANT WAVELENGHT SHIFT - nm 16 14 12 10 8 6 4 2 0 -2 -4 GREEN BLUE 0 5 10 15 20 25 FORWARD CURRENT - mA 30 35 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Red Blue Green -90 -60 -30 0 30 ANGULAR DISPLACEMENT - DEGREES Figure 10. Radiation Pattern – Major Axis 60 NORMALIZED INTENSITY NORMALIZED INTENSITY Figure 9. Relative dominant wavelength vs Forward Current 90 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.
PAGE 7
Intensity Bin Limit Table (1.2: 1 Iv Bin Ratio) Green Color Bin Table Intensity (mcd) at 20 mA Bin Min Max Bin Q 460 550 1 R 550 660 S 660 800 T 800 960 U 960 1150 V 1150 1380 W 1380 1660 X 1660 1990 Y 1990 2400 Z 2400 2900 1 2900 3500 2 3500 4200 3 4200 5040 Max VD 1.8 2.0 VA 2.0 2.2 VB 2.2 2.4 524.0 528.0 3 528.0 532.0 532.0 536.0 536.0 540.0 Xmin Ymin Xmax Ymax 0.0743 0.8338 0.1856 0.6556 0.1650 0.6586 0.1060 0.8292 0.1060 0.
PAGE 8
Avago Color Bin on CIE 1931 Chromaticity Diagram 1.000 0.800 Green 1 2 3 4 5 Y 0.600 0.400 Red 0.200 5 4 0.000 0.000 Blue 3 21 0.100 0.200 0.300 0.400 0.500 0.600 0.700 0.800 X Relative Light Output vs Junction Temperature RELATIVE LIGHT OUTPUT (NORMALIZED AT TJ = 25°C) 10 1 Red Blue Green 0.
PAGE 9
Precautions: Lead Forming: • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering on PC board. • For better control, it is recommended to use proper tool to precisely form and cut the leads to applicable length rather than doing it manually. • If manual lead cutting is necessary, cut the leads after the soldering process. The solder connection forms a mechanical ground which prevents mechanical stress due to lead cutting from traveling into LED package.
PAGE 10
Example of Wave Soldering Temperature Profile for TH LED Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) LAMINAR WAVE HOT AIR KNIFE TURBULENT WAVE 250 Flux: Rosin flux Solder bath temperature: 245°C± 5°C (maximum peak temperature = 250°C) TEMPERATURE (°C) 200 Dwell time: 1.5 sec - 3.0 sec (maximum = 3sec) 150 Note: Allow for board to be sufficiently cooled to room temperature before exerting mechanical force.
PAGE 11
Packaging Box for Ammo Packs FROM LEFT SIDE OF BOX� ADHESIVE TAPE MUST BE� FACING UPWARDS. LABEL ON THIS� SIDE OF BOX ANODE LEAD LEAVES� THE BOX FIRST.
PAGE 12
(V) Vendor ID: (9D) Date Code: Date Code DeptID: Made In: Country of Origin (ii) Avago Baby Label (Only available on bulk packaging) Lamps Baby Label (1P) PART #: Part Number RoHS Compliant e3 max temp 250C (1T) LOT #: Lot Number (9D)MFG DATE: Manufacturing Date QUANTITY: Packing Quantity C/O: Country of Origin Customer P/N: CAT: Intensity Bin Supplier Code: BIN: Refer to below information DATECODE: Date Code Acronyms and Definition: BIN: Example: (i) Color bin only or VF bin only (i) Color