Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Amber Circular 5 mm 7.4 cd 30 ° 50 mA 2.1 V

HLMP-EGxx, HLMP-EHxx, HLMP-ELxx

New T-1¾ (5mm) Extra High Brightness AlInGaP LED Lamps

Data Sheet

Features

• Viewing angle: 15°, 23°, 30°

• High luminous output

• Colors:

590nm Amber

615nm Red Orange

626nm Red

• Package options:

With or without lead stando

• Superior resistance to moisture

• Untinted for 15°, 23° and 30° lamps

Applications

• Trac management:

- Trac signals

- Pedestrian signals

- Work zone warning lights

- Variable message signs

• Solar Power signs

• Commercial outdoor advertising

- Signs

- Marquees

Description

These Precision Optical Performance AlInGaP LEDs

provide superior light output for excellent readability in

sunlight and are extremely reliable. AlInGaP LED tech-

nology provides extremely stable light output over long

periods of time. Precision Optical Performance lamps

utilize the aluminum indium gallium phosphide (AlInGaP)

technology.

These LED lamps are untinted, T-1¾ packages incorpo-

rating second generation optics producing well dened

spatial radiation patterns at specic viewing cone angles.

These lamps are made with an advanced optical grade

epoxy oering superior high temperature and high

moisture resistance performance in outdoor signal and

sign application. The maximum LED junction tempera-

ture limit of +130°C enables high temperature operation

in bright sunlight conditions. The epoxy contains both

uv-a and uv-b inhibitors to reduce the eects of long

term exposure to direct sunlight.

Beneﬁts

• Superior performance for outdoor environments

• Suitable for auto-insertion onto PC board

Summary of content (11 pages)

PAGE 1
HLMP-EGxx, HLMP-EHxx, HLMP-ELxx New T-1¾ (5mm) Extra High Brightness AlInGaP LED Lamps Data Sheet Description Features These Precision Optical Performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. Precision Optical Performance lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology.
PAGE 2
Package Dimension A: Non-standoff 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) d 0.70 (0.028) MAX. 8.71 ± 0.20 (0.343 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 31.60 MIN. (1.244) 0.70 (0.028) MAX. CATHODE LEAD CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.
PAGE 3
Device Selection Guide Typical viewing Angle 2θ1/2 (Deg) [4] Color and Dominant Wavelength (nm), Typ [3] Lamps without Standoff on leads (Package drawing A) Lamps with Standoff on leads (Package drawing B) Luminous Intensity Iv (mcd) [1,2,5] at 20 mA Min Max 15° Amber 590 HLMP-EL1A-Z1Kxx HLMP-EL1B-Z1Kxx 12000 21000 HLMP-EL1A-Z1LDD HLMP-EL1B-Z1LDD 12000 21000 Red 626 HLMP-EG1A-Z10xx HLMP-EG1B-Z10DD 12000 21000 Red Orange 615 HLMP-EH1A-Z10DD HLMP-EH1B-Z10DD 12000 21000 Amber 590 HLM
PAGE 4
Absolute Maximum Ratings TJ = 25°C Parameter Red/ Amber/ Red Orange Unit DC Forward Current [2] 50 mA Peak Forward Current 100 [1] mA Average forward current 30 mA Power Dissipation 120 mW Reverse Voltage 5 V Operating Temperature Range -40 to +100 °C Storage Temperature Range -40 to +100 °C Notes: 1. Duty Factor 30%, frequency 1KHz. 2. Derate linearly as shown in Figure 4 Electrical / Optical Characteristics TJ = 25°C Parameter Symbol Min Typ.
PAGE 5
100 1.0 Red Orange Amber Red FORWARD CURRENT-mA RELATIVE INTENSITY 0.8 0.6 0.4 0.2 0.0 500 550 600 WAVELENGTH - nm 20 40 60 DC FORWARD CURRENT - mA 80 100 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 20 40 30 20 10 0 0.8 0.8 0.6 0.4 0.2 -30 0 30 60 ANGULAR DISPLACEMENT-DEGREE Figure 5.Radiation Pattern for 15° Viewing Angle Lamp 3 50 1.0 -60 1 2 FORWARD VOLTAGE-V 60 1.0 0.0 -90 0 0 20 40 60 80 TA - AMBIENT TEMPERATURE - C 100 Figure 4.
PAGE 6
NORMALIZED INTENSITY 1.0 0.8 0.6 0.4 0.2 0.0 -90 -60 -30 0 30 ANGULAR DISPLACEMENT-DEGREE 60 90 Figure 7. Radiation Pattern for 30° Viewing Angle Lamp Relative Light Output vs Junction Temperature 10.0 Red Orange RELATIVE LIGHT OUTPUT (NORMALIZED AT TJ=25°C) Red Amber 1.0 0.1 -40 -20 0 20 40 60 80 TJ - JUNCTION TEMPERATURE - °C 100 120 140 Relative Forward Voltage vs Junction Temperature 0.20 0.10 Red Orange Red 0.05 Amber FORWARD VOLTAGE SHIFT - V 0.15 0.00 -0.05 -0.10 -0.15 -0.
PAGE 7
Intensity Bin Limit Table (1.3:1 Iv bin ratio) Red Color Range Intensity (mcd) at 20mA Bin Min Max Min Dom V 4200 5500 618 Max Dom X min Y Min X max Y max 630 0.6872 0.3126 0.6890 0.2943 0.6690 0.3149 0.7080 0.2920 W 5500 7200 X 7200 9300 Tolerance for each bin limit is ± 0.5nm Y 9300 12000 Z 12000 16000 Amber Color Range 1 16000 21000 Tolerance for each bin limit is ± 15% VF Bin Table (V at 20mA) Bin ID Min Max VD 1.8 2.0 VA 2.0 2.2 VB 2.2 2.
PAGE 8
Precautions: Lead Forming: • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering on PC board. • For better control, it is recommended to use proper tool to precisely form and cut the leads to applicable length rather than doing it manually. • If manual lead cutting is necessary, cut the leads after the soldering process. The solder connection forms a mechanical ground which prevents mechanical stress due to lead cutting from traveling into LED package.
PAGE 9
Refer to application note AN5334 for more information about soldering and handling of high brightness TH LED lamps. Example of Wave Soldering Temperature Profile for TH LED 260 °C Max TEMPERATURE (°C) Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) Flux: Rosin flux Solder bath temperature: 255°C ± 5°C (maximum peak temperature = 260°C) 105 °C Max Dwell time: 3.0 sec - 5.
PAGE 10
Packaging Box for Ammo Packs Note: The dimension for ammo pack is applicable for the device with standoff and without standoff.
PAGE 11
DeptID: Made In: Country of Origin (ii) Avago Baby Label (Only available on bulk packaging) Lamps Baby Label (1P) PART #: Part Number RoHS Compliant e3 max temp 260C (1T) LOT #: Lot Number (9D)MFG DATE: Manufacturing Date QUANTITY: Packing Quantity C/O: Country of Origin Customer P/N: CAT: Intensity Bin Supplier Code: BIN: Refer to below information DATECODE: Date Code Acronyms and Definition: BIN: Example: (i) Color bin only or VF bin only (Applicable for part number with color bins but withou