Datasheet

3
Part Numbering System
Note: Refer to AB 5337 for complete information on the part numbering system.
Device Selection Guide
Part Number
Color and Dominant
Wavelength λ
d
(nm)
Typ
[3]
Luminous Intensity Iv (mcd) at
20 mA
[1,2,5]
Stando
Typical Viewing
angle (°)
[4]
Min Max
HLMP-EG1G-Y10DD Red 626
9300 21000 No 15
HLMP-EG1H-Y10DD Red 626
9300 21000
Yes
HLMP-EL1G-Y10DD Amber 590
9300 21000
No
HLMP-EL1H-Y10DD Amber 590
9300 21000
Yes
HLMP-EG2G-XZ0DD Red 626
7200 16000 No 23
HLMP-EG2H-XZ0DD Red 626
7200 16000
Yes
HLMP-EL2G-WY0DD Amber 590
5500 12000
No
HLMP-EL2H-WY0DD Amber 590
5500 12000
Yes
HLMP-EG3G-VX0DD Red 626
4200 9300 No 30
HLMP-EG3H-VX0DD Red 626
4200 9300
Yes
HLMP-EL3G-VX0DD Amber 590
4200 9300
No
HLMP-EL3H-VX0DD Amber 590
4200 9300
Yes
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package and it is tested with pulsing condition.
2. The optical axis is closely aligned with the package mechanical axis.
3. Dominant wavelength, λ
d
, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ
½
is the o-axis angle where the luminous intensity is half the on-axis intensity.
5. Tolerance for each bin limit is ± 15%
Packaging Option
DD: Ammopack
Color Bin Selection
0 : Full Distribution
K: Color bin 2 and 4
L: Color bin 4 and 6
Maximum Intensity Bin
Refer to Device Selection Guide
Minimum Intensity Bin
Refer to Device Selection Guide
Viewing Angle and Lead Stando
1G : 15 without stando
1H : 15 with stando
2G : 23 without stando
2H : 23 with stando
3G : 30 without stando
3H : 30 with stando
Color
G : Red
L : Amber
Package
E: 5 mm Standard Round
HLMP – E x xx – x x x xx