Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Amber Circular 5 mm 9300 mcd 15 ° 20 mA 2.1 V HLMP-EL12-VY0DD

HLMP-EGxx, HLMP-ELxx

T-1¾ (5 mm) High Brightness AlInGaP Red and Amber LEDs

Data Sheet

Description

These Precision Optical Performance AlInGaP LEDs

provide superior light output for excellent readability in

sunlight and are extremely reliable. AlInGaP LED tech-

nology provides extremely stable light output over long

periods of time. Precision Optical Performance lamps

utilize the aluminum indium gallium phosphide (AlInGaP)

technology.

These LED lamps are untinted. T-1¾ packages incorpo-

rating second generation optics producing well dened

spatial radiation patterns at specic viewing cone angles.

These lamps are made with an advanced optical grade

epoxy oering superior high temperature and high

moisture resistance performance in outdoor signal and

sign application. The maximum LED junction tempera-

ture limit of +130° C enables high temperature operation

in bright sunlight conditions. The epoxy contains uv

inhibitor to reduce the eects of long term exposure to

direct sunlight.

Benets

• Superior performance for outdoor environment

• Suitable for auto-insertion onto PC board

Features

• Viewing angle: 15°, 23° and 30°

• Well dened spatial radiation pattern

• High brightness material

• Available in Red and Amber

– Red AlInGaP 626 nm

– Amber AlInGaP 590 nm

• Superior resistance to moisture

• Stando and non-stando Package

Applications

• Trac management:

– Trac signals

– Pedestrian signals

– Work zone warning lights

– Variable message signs

• Solar Power signs

• Commercial outdoor advertising

– Signs

– Marquee

Summary of content (11 pages)

PAGE 1
HLMP-EGxx, HLMP-ELxx T-1¾ (5 mm) High Brightness AlInGaP Red and Amber LEDs Data Sheet Description Features These Precision Optical Performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. Precision Optical Performance lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology.
PAGE 2
Package Dimension B: Standoff A: Non-standoff 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) d 8.71 ± 0.20 (0.343 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 31.60 MIN. (1.244) 0.70 (0.028) MAX. CATHODE LEAD CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.
PAGE 3
Device Selection Guide Luminous Intensity Iv (mcd) at 20 mA [1,2,5] Part Number Color and Dominant Wavelength λd (nm) Typ [3] Min Max Standoff HLMP-EG1G-Y10DD Red 626 9300 21000 HLMP-EG1H-Y10DD Red 626 9300 21000 No Yes HLMP-EL1G-Y10DD Amber 590 9300 21000 No HLMP-EL1H-Y10DD Amber 590 9300 21000 Yes HLMP-EG2G-XZ0DD Red 626 7200 16000 HLMP-EG2H-XZ0DD Red 626 7200 16000 No Yes HLMP-EL2G-WY0DD Amber 590 5500 12000 No HLMP-EL2H-WY0DD Amber 590 5500 12000 Yes HLMP-EG3G
PAGE 4
Absolute Maximum Ratings TJ = 25° C Parameter Red/ Amber Unit DC Forward Current [1] 50 mA Peak Forward Current 100 [2] mA Power Dissipation 120 mW LED Junction Temperature 130 °C Operating Temperature Range -40 to +100 °C Storage Temperature Range -40 to +100 °C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty Factor 30%, frequency 1 kHz. Electrical / Optical Characteristics TJ = 25° C Parameter Symbol Min. Typ. Max.
PAGE 5
1.0 100 Amber Red FORWARD CURRENT-mA RELATIVE INTENSITY 0.8 0.6 0.4 0.2 0.0 500 550 600 WAVELENGTH - nm 650 0 20 40 60 DC FORWARD CURRENT - mA 80 100 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES Figure 5. Representative Radiation pattern for 15° Viewing Angle Lamp 5 20 0 1 2 FORWARD VOLTAGE-V 3 60 50 40 30 20 10 0 0 20 40 60 80 TA - AMBIENT TEMPERATURE - C 100 Figure 4. Maximum Forward Current vs Ambient Temperature NORMALIZED INTENSITY NORMALIZED INTENSITY Figure 3.
PAGE 6
10 RELATIVE LIGHT OUTPUT NORMALIZED AT TJ = 25° C NORMALIZED INTENSITY 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 7. Representative Radiation pattern for 30° Viewing Angle Lamp Amber Red FORWARD VOLTAGE SHIFT - V 0.4 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -40 -20 0 20 40 60 80 100 TJ - JUNCTION TEMPERATURE Figure 9. Forward Voltage Shift vs Junction Temperature 6 120 1 0.1 -40 -20 0 20 40 60 80 100 TJ - JUNCTION TEMPERATURE Figure 8.
PAGE 7
Intensity Bin Limit Table (1.3 : 1 Iv Bin Ratio) Red Color Range Intensity (mcd) at 20 mA Bin Min Max Min Dom U 3200 4200 618.0 Max Dom X min Y Min X max Y max 630.0 0.6872 0.3126 0.6890 0.2943 0.6690 0.3149 0.7080 0.2920 V 4200 5500 W 5500 7200 Tolerance for each bin limit is ± 0.5 nm X 7200 9300 Y 9300 12000 Amber Color Range Z 12000 16000 1 16000 21000 Tolerance for each bin limit is ± 15% VF Bin Table (V at 20 mA) Bin ID Min Max VD 1.8 2.0 VA 2.0 2.
PAGE 8
Precautions: Lead Forming: • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering on PC board. • For better control, it is recommended to use proper tool to precisely form and cut the leads to applicable length rather than doing it manually. • If manual lead cutting is necessary, cut the leads after the soldering process. The solder connection forms a mechanical ground which prevents mechanical stress due to lead cutting from traveling into LED package.
PAGE 9
Refer to application note AN5334 for more information about soldering and handling of high brightness TH LED lamps. Example of Wave Soldering Temperature Profile for TH LED 260 °C Max TEMPERATURE (°C) Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) Flux: Rosin flux Solder bath temperature: 255°C ± 5°C (maximum peak temperature = 260°C) 105 °C Max Dwell time: 3.0 sec - 5.
PAGE 10
Packaging Box for Ammo Packs Note: The dimension for ammo pack is applicable for the device with standoff and without standoff.
PAGE 11
DeptID: Made In: Country of Origin (ii) Avago Baby Label (Only available on bulk packaging) Lamps Baby Label (1P) PART #: Part Number RoHS Compliant e3 max temp 260C (1T) LOT #: Lot Number (9D)MFG DATE: Manufacturing Date QUANTITY: Packing Quantity C/O: Country of Origin Customer P/N: CAT: Intensity Bin Supplier Code: BIN: Refer to below information DATECODE: Date Code Acronyms and Definition: BIN: Example: (i) Color bin only or VF bin only (i) Color bin only or VF bin only (Applicable for pa