Datasheet
9
Figure 10. Dimension for ammo pack
Figure 9. Recommended Wave Soldering Prole
Recommended Wave Soldering Prole
Ammo Packs Drawing
Note: The ammo-packs drawing is applicable for packaging option –DD & -ZZ and regardless stando or non-stando
BOTTOM SIDE
TOP SIDE
NOTE: ALLOW FOR BOARDS TO BE
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)
250
200
150
FLUXING
TURBULENT WAVE
PREHEAT
TIME - SECONDS
TEMPERATURE - °C
100
50
30
0 10 20 30 40 50 60 70 80 90 100
LAMINAR WAVE
HOT AIR KNIFE
LEAD FREE SOLDER
96.5%Sn; 3.0%Ag; 0.5% Cu
SUFFICIENTLY COOLED BEFORE
EXERTING MECHANICAL FORCE.
OF PC BOARD
OF PC BOARD
PREHEAT SETTING = 150
°
C (100
°
C PCB)
SOLDER WAVE TEMPERATURE = 245
°
C ± 5˚C
AIR KNIFE AIR TEMPERATURE = 390
°
C
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
SOLDER: SN63; FLUX: RMA
AIR KNIFE ANGLE = 40