Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Amber Circular 5 mm 8100 mcd 15 ° 20 mA 2.2 V

HLMP-EGxx, HLMP-ELxx and HLMP-EHxx

T-1¾ (5mm) Extra High Brightness AlInGaP LED Lamps

Data Sheet

Features

• Viewing angle: 15°, 23°, 30°

• High luminous output

• Colors:

590nm Amber

615nm Red-Orange

626nm Red

• Package options:

With or without lead stando

Applications

• Trac management:

- Trac signals

- Pedestrian signals

- Work zone warning lights

- Variable message signs

• Commercial outdoor advertising

- Signs

- Marquees

Description

These Precision Optical Performance AlInGaP LEDs

provide superior light output for excellent readability in

sunlight and are extremely reliable. AlInGaP LED tech-

nology provides extremely stable light output over long

periods of time. Precision Optical Performance lamps

utilize the aluminum indium gallium phosphide (AlInGaP)

technology.

These LED lamps are untinted, T-1¾ packages incorpo-

rating second generation optics producing well dened

spatial radiation patterns at specic viewing cone angles.

Benets

• Superior performance for outdoor environments

• Suitable for auto-insertion onto PC board

Summary of content (10 pages)

PAGE 1
HLMP-EGxx, HLMP-ELxx and HLMP-EHxx T-1¾ (5mm) Extra High Brightness AlInGaP LED Lamps Data Sheet Description Features These Precision Optical Performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. Precision Optical Performance lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology.
PAGE 2
Package Dimension A B 5.00 ± 0.20 (0.197 ±� 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 1.14 ± 0.20 (0.045 ±� 0.008) 8.71 ± 0.20 (0.343 ± 0.008) 0.70 (0.028) MAX. 8.71 ± 0.20 (0.343 ± 0.008) d 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 31.60 MIN. (1.244) 0.70 (0.028) MAX. CATHODE LEAD CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.015) PART NO.
PAGE 3
Device Selection Guide Typical Viewing Angle 2θ½ (Deg) [4] Color and Dominant Wavelength (nm), Typ. [3] Lamps without Standoffs on Leads (Outline Drawing A) 15° Amber 590 HLMP-EL12-VY0DD Lamps with Standoffs on Leads (Outline Drawing B) Luminous Intensity Iv (mcd) [1,2,5] @ 20mA Min. Max.
PAGE 4
Part Numbering System HLMP – E x x x - x x x x x Mechanical Options 00 : Bulk Packaging DD : Ammo Pack YY : Flexi-Bin; Bulk Packaging ZZ : Flexi-Bin; Ammo Pack Color Bin Selections 0 : Full color distribution 2 : Amber color bin 2 only 4 : Amber color bin 4 only K : Amber color bin 2 and 4 only Z : Special Vf Bin Range Maximum Intensity Bin 0 : No maximum intensity bin limitation Minimum Intensity Bin Viewing Angle and Lead Standoffs 12 : 15 deg without lead standoffs 13 : 15 deg with lead standoffs 22 : 23
PAGE 5
Electrical/ Optical Characteristics at TA = 25ºC Parameter Forward Voltage Amber Red Red-Orange Peak Wavelength Amber Red Red-Orange Dominant Wavelength [1] Amber Red Red-Orange Symbol VF Minimum Average 1.80 2.20 2.10 2.00 Maximum Units IF = 20mA 2.40 λd 584.5 620.0 612.0 Reverse Voltage VR 5 Spectral Halfwidth Dλ½ Capacitance Thermal Resistance V IF = 20mA 590 626 615 λPEAK nm 594.5 630.0 621.
PAGE 6
0 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 50 FORWARD CURRENT - mA 2.5 Red Red-Orange 40 Amber 30 20 10 0 0 0.5 1 1.5 2 2.5 2 1.5 1 0.5 0 3 FORWARD VOLTAGE - V 0.9 45 0.8 NORMALIZED INTENSITY I F - FORWARD CURRENT - mA 1 50 40 35 30 25 20 15 100 0.3 0 -90 120 -60 -30 0 30 60 90 ANGULAR DISPLACEMENT - DEGREES Figure 5. Representative spatial radiation pattern for 15° viewing angle lamps 1 1 0.9 0.9 0.8 0.8 NORMALIZED INTENSITY NORMALIZED INTENSITY 0.4 0.
PAGE 7
RELATIVE LOP (NORMALIZE AT 25 °C ) 10 Amber Red-Orange Red 1 0.1 -50 -25 0 25 50 75 100 125 150 JUNCTION TEMPERATURE - °C Figure 8. Relative light output vs. junction temperature Intensity Bin Limits (mcd at 20mA) Bin Name Minimum Maximum Bin Name Minimum Maximum R 1500 1900 VD 1.8 2.0 S 1900 2500 VA 2.0 2.2 T 2500 3200 VB 2.2 2.
PAGE 8
Precautions: Avago Technologies LED configuration Lead Forming: • The leads of an LED lamp may be performed or cut to length prior to insertion and soldering on PC board. • If lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress that induced into the LED package. Otherwise, cut the leads to applicable length after soldering process at room temperature.
PAGE 9
Recommended Wave Soldering Profile LAMINAR WAVE TURBULENT WAVE HOT AIR KNIFE 250 TEMPERATURE - °C 200 TOP SIDE OF PC BOARD BOTTOM SIDE OF PC BOARD 150 CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) PREHEAT SETTING = 150°C (100°C PCB) SOLDER WAVE TEMPERATURE = 245°C ± 5˚C AIR KNIFE AIR TEMPERATURE = 390°C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) AIR KNIFE ANGLE = 40 SOLDER: SN63; FLUX: RMA LEAD FREE SOLDER 96.5%Sn; 3.0%Ag; 0.
PAGE 10
Packaging Box for Ammo Packs Note: The dimension for ammo pack is applicable for the device with standoff and without standoff. Figure 11. The arrangement of unit in ammo pack For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved.