Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Orange Circular 5 mm 1.29 cd 30 ° 50 mA 1.98 V

Description

These Precision Optical Perform ance AlInGaP LEDs pro-

vide superior light output for excellent readability in sun-

light and are extremely reliable. AlInGaP LED technology

provides extremely stable light output over long periods

of time. Precision Optical Per formance lamps utilize the

aluminum indium gallium phos phide (AlInGaP) technol-

ogy.

These LED lamps are untinted, nondiused, T-1

pack-

ages incorporating second generation optics producing

well dened spatial radiation patterns at specic viewing

cone angles.

These lamps are made with an advanced optical grade

epoxy, oering superior high tempera ture and high

moisture resistance performance in outdoor signal and

sign applications. The high maximum LED junction

tempera ture limit of +130°C enables high temperature

operation in bright sunlight conditions. The package ep-

oxy contains both uv-a and uv-b in hibitors to reduce the

eects of long term exposure to direct sunlight.

These lamps are available in two package options to give

the designer exibility with device mounting.

Benets

• Viewing angles match trac management sign require-

ments

• Colors meet automotive and pedestrian signal speci-

cations

• Superior performance in outdoor environments

• Suitable for autoinsertion onto PC boards

Features

• Well dened spatial radiation patterns

• Viewing angles: 8°, 15°, 23°, 30°

• High luminous output

• Colors:

590 nm amber

605 nm orange

615 nm reddish-orange

626 nm red

• High operating temperature: T

led = +130°C

• Superior resistance to moisture

• Package options:

With or without lead stand-os

Applications

• Trac management:

Trac signals

Pedestrian signals

Work zone warning lights

Variable message signs

• Commercial outdoor advertising:

Signs

Marquees

• Automotive:

Exterior and interior lights

HLMP-ELxx, HLMP-EHxx, HLMP-EJxx, HLMP-EGxx

T-1

(5 mm) Precision Optical Performance

AlInGaP LED Lamps

Data Sheet

Summary of content (15 pages)

PAGE 1
HLMP-ELxx, HLMP-EHxx, HLMP-EJxx, HLMP-EGxx T-13/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps Data Sheet Description Features These Precision Optical Performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. Precision Optical Performance lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology.
PAGE 2
Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps without Standoffs on Leads (Outline Drawing A) 8° Amber 590 HLMP-EL08-T0000 HLMP-EL08-VY000 Lamps with Standoffs on Leads (Outline Drawing B) HLMP-EL10-VY000 HLMP-EL08-VYK00 Orange 605 Max.
PAGE 3
Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps without Standoffs on Leads (Outline Drawing A) 15° Amber 590 Max.
PAGE 4
Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps without Standoffs on Leads (Outline Drawing A) 23° Amber 590 HLMP-EL24-NR000 HLMP-EL24-PS000 Lamps with Standoffs on Leads (Outline Drawing B) HLMP-EL26-PS000 Min. Max.
PAGE 5
Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps without Standoffs on Leads (Outline Drawing A) 30° Amber 590 Lamps with Standoffs on Leads (Outline Drawing B) Min. Max.
PAGE 6
Part Numbering System HLMP - x x xx - x x x xx Mechanical Options 00: Bulk Packaging DD: Ammo Pack YY: Flexi-Bin; Bulk Packaging ZZ: Flexi-Bin; Ammo Pack Color Bin Selections 0: No color bin limitation 4: Amber color bin 4 only K: Amber color bins 2 and 4 only Maximum Intensity Bin 0: No Iv bin limitation Minimum Intensity Bin Viewing Angle & Lead Stand Offs 08: 8 deg without lead stand offs 10: 8 deg with lead stand offs 15: 15 deg without lead stand offs 17: 15 deg with lead stand offs 24: 23 deg without
PAGE 7
Package Dimensions A B 5.00 ± 0.20 (0.197 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) d 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 31.60 MIN. (1.244) 0.70 (0.028) MAX. CATHODE LEAD 1.00 MIN. (0.039) CATHODE FLAT CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.
PAGE 8
Absolute Maximum Ratings at TA = 25°C DC Forward Current [1,2,3] 50 mA Peak Pulsed Forward Current [2,3] 100 mA Average Forward Current [3] 30 mA Reverse Voltage (IR = 100 µA) 5V LED Junction Temperature 130 °C Operating Temperature -40 °C to +100 °C Storage Temperature -40 °C to +100 °C Notes: 1. Derate linearly as shown in Figure 4. 2. For long term performance with minimal light output degradation, drive currents between 10 mA and 30 mA are recommended.
PAGE 9
1.0 ORANGE 90 80 RED 70 CURRENT – mA RELATIVE INTENSITY 100 RED-ORANGE AMBER 0.5 60 RED 50 40 AMBER 30 20 0 550 600 650 10 0 1.0 700 1.5 WAVELENGTH – nm Figure 1. Relative intensity vs. peak wavelength IF – FORWARD CURRENT – mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2.5 2.0 1.5 1.0 0.5 0 20 40 IF – DC FORWARD CURRENT – mA Figure 3. Relative luminous intensity vs. forward current 9 2.5 3.0 Figure 2. Forward current vs. forward voltage 3.0 0 2.
PAGE 10
1 0.9 0.8 0.8 0.7 0.7 NORMALIZED INTENSITY NORMALIZED INTENSITY 1 0.9 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 0.6 0.5 0.4 0.3 0.2 0.1 0 0 90 30 ANGULAR DISPLACEMENT – DEGREES 1 1 0.9 0.9 0.8 0.8 0.7 0.6 0.5 0.4 0.3 0.6 0.5 0.4 0.3 0.2 0.1 0 -100 0.1 100 Figure 7. Representative spatial radiation pattern for 23° viewing angle lamps 10 180 0.7 0.2 -50 0 50 ANGULAR DISPLACEMENT – DEGREES 150 Figure 6.
PAGE 11
RELATIVE LOP (NORMALIZED AT 25C) 10 ORANGE RED RED-ORANGE AMBER 1 0.1 -50 -25 0 25 50 75 JUNCTION TEMPERATURE – C 100 125 150 Figure 9. Relative light output vs. junction temperature Intensity Bin Limits (mcd at 20 mA) Bin Name Min. Amber Color Bin Limits (nm at 20 mA) Max. Bin Name Min. Max. 584.5 587.0 K 310 400 1 L 400 520 2 587.0 589.5 M 520 680 4 589.5 592.0 6 592.0 594.
PAGE 12
Precautions: Lead Forming: • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering on PC board. • For better control, it is recommended to use proper tool to precisely form and cut the leads to applicable length rather than doing it manually. • If manual lead cutting is necessary, cut the leads after the soldering process. The solder connection forms a mechanical ground which prevents mechanical stress due to lead cutting from traveling into LED package.
PAGE 13
Refer to application note AN5334 for more information about soldering and handling of high brightness TH LED lamps. Example of Wave Soldering Temperature Profile for TH LED Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) LAMINAR WAVE HOT AIR KNIFE TURBULENT WAVE 250 TEMPERATURE (°C) Flux: Rosin flux 200 Solder bath temperature: 245°C± 5°C (maximum peak temperature = 250°C) 150 Dwell time: 1.5 sec - 3.
PAGE 14
Packaging Box for Ammo Packs LABEL ON THIS SIDE OF BOX. FROM LEFT SIDE OF BOX, ADHESIVE TAPE MUST BE FACING UPWARD. A + GO AVA OGIES NOL ECH DE ANO T ANODE LEAD LEAVES THE BOX FIRST. C – BEL R LA E OTH M E HOD CAT NOTE: THE DIMENSION FOR AMMO PACK IS APPLICABLE FOR THE DEVICE WITH STANDOFF AND WITHOUT STANDOFF.
PAGE 15
DeptID: Made In: Country of Origin (ii) Avago Baby Label (Only available on bulk packaging) Lamps Baby Label (1P) PART #: Part Number RoHS Compliant e3 max temp 250C (1T) LOT #: Lot Number (9D)MFG DATE: Manufacturing Date QUANTITY: Packing Quantity C/O: Country of Origin Customer P/N: CAT: Intensity Bin Supplier Code: BIN: Refer to below information DATECODE: Date Code Acronyms and Definition: BIN: Example: (i) Color bin only or VF bin only (i) Color bin only or VF bin only (Applicable for pa