Datasheet

ManualsBrandsBroadcom ManualsLEDsLED 635nm Red 5 mm T-1 3/4

Description

These Precision Optical Performance AlInGaP LEDs provide

superior light output for excellent readability in sunlight

and are extremely reliable. AlInGaP LED technology pro-

vides extremely stable light output over long periods of

time. Precision Optical Performance lamps utilize the alumi-

num indium gallium phosphide (AlInGaP) technology.

These LED lamps are untinted, nondiused, T-1

pack-

ages incorporating second generation optics producing

well dened spatial radiation patterns at specic viewing

cone angles.

These lamps are made with an advanced optical grade

epoxy, oering superior high temperature and high mois-

ture resistance performance in outdoor signal and sign

applications. The high maximum LED junction tempera-

ture limit of +130°C enables high temperature operation

in bright sunlight conditions. The package epoxy contains

both uv-a and uv-b inhibitors to reduce the eects of long

term exposure to direct sunlight.

These lamps are available in two package options to give

the designer exibility with device mounting.

Benets

• Viewing angles match trac management sign require-

ments

• Colors meet automotive and pedestrian signal speci-

cations

• Superior performance in outdoor environments

• Suitable for autoinsertion onto PC boards

Features

• Well dened spatial radiation patterns

• Viewing angles: 8°, 15°, 23°, 30°

• High luminous output

• Colors:

590 nm amber

605 nm orange

615 nm reddish-orange

626 nm red

• High operating temperature: T

led = +130°C

• Superior resistance to moisture

• Package options:

With or without lead stand-os

Applications

• Trac management:

Trac signals

Pedestrian signals

Work zone warning lights

Variable message signs

• Commercial outdoor advertising:

Signs

Marquees

• Automotive:

Exterior and interior lights

HLMP-ELxx, HLMP-EHxx, HLMP-EJxx, HLMP-EGxx

T-1

(5 mm) Precision Optical Performance

AlInGaP LED Lamps

Data Sheet

Summary of content (15 pages)

PAGE 1
HLMP-ELxx, HLMP-EHxx, HLMP-EJxx, HLMP-EGxx T-13/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps Data Sheet Description Features These Precision Optical Performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. Precision Optical Performance lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology.
PAGE 2
Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] Lamps without Standoffs on Leads (Outline Drawing A) Lamps with Standoffs on Leads (Outline Drawing B) Luminous Intensity Iv (mcd)[1,2,5] @ 20 mA Min. Max.
PAGE 3
Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] 15° Lamps without Standoffs on Leads (Outline Drawing A) Amber 590 Lamps with Standoffs on Leads (Outline Drawing B) Luminous Intensity Iv (mcd)[1,2,5] @ 20 mA Min. Max.
PAGE 4
Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] 23° Amber 590 Lamps without Standoffs on Leads (Outline Drawing A) Lamps with Standoffs on Leads (Outline Drawing B) Luminous Intensity Iv (mcd)[1,2,5] @ 20 mA Min. Max.
PAGE 5
Device Selection Guide Typical Viewing Angle 2θ 1/2 (Deg.)[4] Color and Dominant Wavelength (nm), Typ.[3] 30° Amber 590 Lamps without Standoffs on Leads (Outline Drawing A) Lamps with Standoffs on Leads (Outline Drawing B) Luminous Intensity Iv (mcd)[1,2,5] @ 20 mA Min. Max.
PAGE 6
Part Numbering System HLMP - x x xx - x x x xx Mechanical Options 00: Bulk Packaging DD: Ammo Pack YY: Flexi-Bin; Bulk Packaging ZZ: Flexi-Bin; Ammo Pack Color Bin Selections 0: No color bin limitation 4: Amber color bin 4 only K: Amber color bins 2 and 4 only Maximum Intensity Bin 0: No Iv bin limitation Minimum Intensity Bin Viewing Angle & Lead Stand Offs 08: 8 deg without lead stand offs 10: 8 deg with lead stand offs 15: 15 deg without lead stand offs 17: 15 deg with lead stand offs 24: 23 deg without
PAGE 7
Package Dimensions A B 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) d 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 31.60 MIN. (1.244) 0.70 (0.028) MAX. CATHODE LEAD 1.00 MIN. (0.039) CATHODE FLAT CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 5.80 ± 0.20 (0.228 ± 0.008) 2.
PAGE 8
Absolute Maximum Ratings at TA = 25°C DC Forward Current[1,2,3] . .................................................................................... 50 mA Peak Pulsed Forward Current[2,3] . ......................................................................100 mA Average Forward Current[3] . ................................................................................. 30 mA Reverse Voltage (IR = 100 µA).........................................................................................
PAGE 9
1.0 100 RED-ORANGE AMBER 80 RED 70 CURRENT – mA RELATIVE INTENSITY ORANGE 90 0.5 60 RED 50 40 AMBER 30 20 10 0 550 600 650 0 1.0 700 WAVELENGTH – nm Figure 1. Relative intensity vs. peak wavelength 55 50 IF – FORWARD CURRENT – mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2.5 2.0 1.5 1.0 0.5 45 40 35 30 25 20 15 10 5 0 0 20 40 0 60 20 40 60 80 100 120 TA – AMBIENT TEMPERATURE – °C IF – DC FORWARD CURRENT – mA Figure 4. Maximum forward current vs.
PAGE 10
1 NORMALIZED INTENSITY – % 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 30 60 90 120 150 180 ANGULAR DISPLACEMENT – DEGREES Figure 6. Representative spatial radiation pattern for 15° viewing angle lamps 1 NORMALIZED INTENSITY – % 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -100 -50 0 50 100 ANGULAR DISPLACEMENT – DEGREES Figure 7. Representative spatial radiation pattern for 23° viewing angle lamps 1 NORMALIZED INTENSITY 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.
PAGE 11
Intensity Bin Limits RELATIVE LOP (NORMALIZED AT 25°C) 10 (mcd at 20 mA) ORANGE RED RED-ORANGE AMBER 1 0.1 -50 -25 0 25 50 75 JUNCTION TEMPERATURE – °C Figure 9. Relative light output vs. junction temperature 100 125 150 Bin Name Min. Max.
PAGE 12
Precautions: Lead Forming: • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering on PC board. • For better control, it is recommended to use proper tool to precisely form and cut the leads to applicable length rather than doing it manually. • If manual lead cutting is necessary, cut the leads after the soldering process. The solder connection forms a mechanical ground which prevents mechanical stress due to lead cutting from traveling into LED package.
PAGE 13
Refer to application note AN5334 for more information about soldering and handling of high brightness TH LED lamps. Example of Wave Soldering Temperature Profile for TH LED Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) LAMINAR WAVE TURBULENT WAVE HOT AIR KNIFE 250 Flux: Rosin flux Solder bath temperature: 245°C± 5°C (maximum peak temperature = 250°C) 200 150 Dwell time: 1.5 sec - 3.
PAGE 14
Packaging Box for Ammo Packs LABEL ON THIS SIDE OF BOX. FROM LEFT SIDE OF BOX, ADHESIVE TAPE MUST BE FACING UPWARD. A + O AG ES AV LOGI O HN E OD AN TEC E OD TH CA – ANODE LEAD LEAVES THE BOX FIRST. C ER TH MO L BE LA NOTE: THE DIMENSION FOR AMMO PACK IS APPLICABLE FOR THE DEVICE WITH STANDOFF AND WITHOUT STANDOFF.
PAGE 15
DeptID: Made In: Country of Origin (ii) Avago Baby Label (Only available on bulk packaging) Lamps Baby Label (1P) PART #: Part Number RoHS Compliant e3 max temp 250C (1T) LOT #: Lot Number (9D)MFG DATE: Manufacturing Date QUANTITY: Packing Quantity C/O: Country of Origin Customer P/N: CAT: Intensity Bin Supplier Code: BIN: Refer to below information DATECODE: Date Code Acronyms and Definition: BIN: Example: (i) Color bin only or VF bin only (i) Color bin only or VF bin only (Applicable for pa