Datasheet
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved.
AV02-0230EN - July 26, 2014
Example of Wave Soldering Temperature Prole for TH LED
0 10 20 30 40 50 60 70 80 90 100
250
200
150
100
50
TIME (SECONDS)
PREHEAT
TURBULENT WAVE
LAMINAR
HOT AIR KNIFE
TEMPERATURE (°C)
Recommended solder:
Sn63 (Leaded solder alloy)
SAC305 (Lead-free solder alloy)
Flux: Rosin ux
Solder bath temperature:
245 °C ± 5 °C (maximum peak temperature = 250 °C)
Dwell time: 1.5 sec – 3.0 sec (maximum = 3 sec)
Note: Allow for board to be suciently cooled to
room temperature before you exert mechanical force.