Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Green Circular 5 mm 16.5 cd 30 ° 30 mA 3.2 V

HLMP-Cx1A/1B/2A/2B/3A/3B

New 5mm Blue and Green LED Lamps

Data Sheet

CAUTION: INGaN devices are Class 1C HBM ESD sensitive per JEDEC Standard. Please observe appropriate

precautions during handling and processing. Refer to Application Note AN – 1142 for additional details.

Description

These high intensity blue and green T-1¾ package LEDs

are untinted and non-diused. Based on the most ecient

and cost eective InGaN material technology and incor-

porating second generation optics they produce well

dened spatial radiation patterns at specic viewing cone

angles.

Advanced optical grade epoxy construction oers superior

high temperature and moisture resistance performance in

outdoor signal and sign applications. The epoxy contains

UV inhibitor ro reduce the eects of long term exposure

to direct sunlight.

Features

• Well dened spatial radiation pattern

• High luminous output

• Untinted, Non-diused

• Available in Color:

– Blue 470nm

– Green 525nm

• Viewing Angle: 15°, 23° and 30°

• Stando or non-stando

• Superior resistance to moisture

Applications

• Commercial outdoor advertising

• Trac Sign

• Variable Message Sign

Summary of content (12 pages)

PAGE 1
HLMP-Cx1A/1B/2A/2B/3A/3B New 5mm Blue and Green LED Lamps Data Sheet Description Features These high intensity blue and green T-1¾ package LEDs are untinted and non-diffused. Based on the most efficient and cost effective InGaN material technology and incorporating second generation optics they produce well defined spatial radiation patterns at specific viewing cone angles.
PAGE 2
Package Dimensions Drawing A (Non-standoff) 1.00 ± 0.20 0.039 ± 0.008 8.70 ± 0.20 0.343 ± 0.008 0.70 max 0.028 5.80 ± 0.20 0.228 ± 0.008 0.50 ± 0.10 sq. typ. 0.020 ± 0.004 5.00 ± 0.20 0.197 ± 0.008 2.54 ± 0.38 0.100 ± 0.015 31.60 min 1.244 Cathode 1.00 min 0.039 cathode flat Drawing B (Standoff) 8.70 ± 0.20 0.343 ± 0.008 1.00 ± 0.20 0.039 ± 0.008 1.30 ± 0.15 0.051 ± 0.006 0.70 max 0.028 5.80 ± 0.20 0.228 ± 0.008 0.50 ± 0.10 sq. typ. 0.020 ± 0.004 5.00 ± 0.20 0.197 ± 0.008 2.54 ± 0.38 0.
PAGE 3
Device Selection Guide Part Number Color Typical Viewing angle, 2θ½ (°) [4] Luminous Intensity Iv (mcd) at 20 mA [1,2,5] Standoff / Min Max Non Standoff HLMP-CB1A-XY0DD Blue 15° 7200 12000 Package drawing Non Standoff A Standoff B Non Standoff A Standoff B Non Standoff A Standoff B Non Standoff A Standoff B Non Standoff A Standoff B Non Standoff A Standoff B HLMP-CB1A-XYBDD HLMP-CB1A-XYCDD HLMP-CB1B-XY0DD HLMP-CB1B-XYBDD HLMP-CB1B-XYCDD HLMP-CB2A-VW0DD 23° 4200 7200 HL
PAGE 4
Part Numbering System HLMP  C x xx  x x x xx Packaging Option DD: Ammo Pack Color Bin Selection 0: Full Distribution B: Color Bin 2 & 3 C: Color Bin 3 & 4 Maximum Intensity Bin 0: No maximum intensity limit (refer to selection guide) Minimum Intensity Bin Refer to Device Selection Guide Viewing Angle and Lead Standoffs 1A: 15° without lead standoff 1B: 15° with lead standoff 2A: 23° without lead standoff 2B: 23° with lead standoff 3A: 30° without lead standoff 3B: 30° with lead standoff Color B: Blu
PAGE 5
Electrical / Optical Characteristics TJ = 25°C Parameter Symbol Forward Voltage Green / Blue VF Reverse Voltage VR Dominant Wavelength[1] λd Peak Wavelength Green Blue λPEAK Spectral Half Width Green Blue Δλ1/2 Thermal Resistance RθJ-PIN Luminous Efficacy [2] ηV Green Blue Green Blue Thermal coefficient of λd Green Blue Min. Typ. Max. 2.8 3.2 3.8 5 519.0 460.0 525.0 470.0 516 464 30 23 240 518 78 0.028 0.024 539.0 480.
PAGE 6
100 BLUE 430 FORWARD CURRENT-mA RELATIVE INTENSITY 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 GREEN 480 530 WAVELENGTH - nm 580 IFmax - MAXIMUM FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20mA) 2.5 GREEN 2.0 1.5 1.0 0.5 0 20 40 60 80 DC FORWARD CURRENT-mA 100 1 2 3 FORWARD VOLTAGE-V 4 5 40 60 80 TA - AMBIENT TEMPERATURE - °C 100 30 25 20 15 10 5 0 120 0 20 Figure 4. Maximum Forward Current vs Ambient Temperature 10 1.
PAGE 7
1.0 0.8 0.8 NORMALIZED INTENSITY NORMALIZED INTENSITY 1.0 0.6 0.4 0.2 0.0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREE FORWARD VOLTAGE SHIFT-V NORMALZIED INTENSITY (PHOTO) -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREE 90 0.3 Blue Green 1 -40 -20 0 20 40 60 80 TJ - JUNCTION TEMPERATURE Figure 9. Relative Light Output vs Junction Temperature 7 0.2 Figure 8. Radiation Pattern for 30° 10 0.1 0.4 0.0 -90 90 Figure 7. Radiation Pattern for 23° 0.6 100 120 Blue Green 0.2 0.
PAGE 8
Intensity Bin Limit Table (1.3:1 Iv bin ratio) Bin Intensity (mcd) at 20mA Min Max U 3200 4200 V 4200 5500 W 5500 7200 X 7200 9300 Y 9300 12000 Z 12000 16000 1 16000 21000 2 21000 27000 3 27000 35000 4 35000 45000 5 45000 59000 6 59000 76000 Tolerance for each bin limit is ± 15% Green Color Bin Table Blue Color Bin Table Min Max Bin Dom Dom Corner Point Chromaticity Coordinate Min Max Bin Dom Dom Corner Point Chromaticity Coordinate 1 519 523 x 0.0667 0.
PAGE 9
Precautions: Lead Forming: • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering on PC board. • For better control, it is recommended to use proper tool to precisely form and cut the leads to applicable length rather than doing it manually. • If manual lead cutting is necessary, cut the leads after the soldering process. The solder connection forms a mechanical ground which prevents mechanical stress due to lead cutting from traveling into LED package.
PAGE 10
Example of Wave Soldering Temperature Profile for TH LED 260°C Max TEMPERATURE (°C) Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) Flux: Rosin flux Solder bath temperature: 255°C ± 5°C (maximum peak temperature = 260°C) 105°C Max Dwell time: 3.0 sec - 5.0 sec (maximum = 5sec) 60 sec Max Note: Allow for board to be sufficiently cooled to room temperature before exerting mechanical force. TIME (sec) Ammo Packs Drawing 6.35 ± 1.30 0.250 ± 0.051 12.70 ± 1.00 0.500 ± 0.
PAGE 11
Packaging Box for Ammo Packs FROM LEFT SIDE OF BOX ADHESIVE TAPE MUST BE FACING UPWARDS. LABEL ON THIS SIDE OF BOX ANODE LEAD LEAVES THE BOX FIRST.
PAGE 12
(V) Vendor ID: (9D) Date Code: Date Code DeptID: Made In: Country of Origin (ii) Avago Baby Label (Only available on bulk packaging) Lamps Baby Label (1P) PART #: Part Number RoHS Compliant e3 max temp 260C (1T) LOT #: Lot Number (9D)MFG DATE: Manufacturing Date QUANTITY: Packing Quantity C/O: Country of Origin Customer P/N: CAT: Intensity Bin Supplier Code: BIN: Color Bin DATECODE: Date Code DISCLAIMER: Avago’s products and software are not specifically designed, manufactured or authorized for