Datasheet

4
Absolute Maximum Ratings at T
A
= 25°C
High High
DH AS Eciency Performance
AlGaAs Red and Green and
Parameter Red Orange Yellow Emerald Green Units
DC Forward Current
1
30 30 20 30 mA
Transient Forward Current
2
500 500 500 500 mA
(10 µsec Pulse)
Reverse Voltage (Ir = 100 µA) 5 5 5 5 V
LED Junction Temperature 110 110 110 110 °C
Operating Temperature Range –20 to +100 –40 to +100 –40 to +100 –20 to +100 °C
Storage Temperature Range –40 to +100 –40 to +100 –40 to +100 –40 to +100 °C
Notes:
1. See Figure 5 for maximum current derating vs. ambient temperature.
2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.
Package Dimensions
HLMP-Cx15 and HLMP-Cx23 HLMP-Cx17
1.14 ± 0.20
(0.045 ± 0.008)
5.80 ± 0.20
(0.228 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244)
MIN.
0.70 (0.028)
MAX.
1.00
(0.039)
MIN.
8.71 ± 0.20
(0.343 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
0.50 ± 0.10
(0.020 ± 0.004)
SQ. TYP.
Notes:
1. All dimensions are in millimeters (inches).
2. Leads are mild steel, solder dipped.
3. An epoxy meniscus may extend about 0.5 mm (0.020 in.)
down the leads.
CATHODE
LEAD
1.85 (0.073)
MAX.
CATHODE
FLAT
(NOTE 1)
1.14 ± 0.20
(0.045 ± 0.008)
5.80 ± 0.20
(0.228 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244)
MIN.
0.70 (0.028)
MAX.
1.00
(0.039)
MIN.
8.71 ± 0.20
(0.343 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
0.50 ± 0.10
(0.020 ± 0.004)
SQ. TYP.
CATHODE
LEAD
CATHODE
FLAT
1.50 ± 0.15
(0.059 ± 0.006)
12.60 ± 0.18
(0.496 ± 0.007)
Notes:
1. All dimensions are in millimeters (inches).
2. An epoxy meniscus may extend about 0.5 mm (0.020 in.) down the
leads.
3. For PCB hole recommendations, see the Precautions section.