Datasheet
4
Absolute Maximum Ratings at T
A
= 25°C
DH AS High
Standard AlGaAs E. High Perf. Emerald
Parameter Red Red Red Orange Yellow Green Green Units
DC Forward Current
[1]
50 30 30 30 20 30 30 mA
Peak Forward Current
[2]
1000 300 90 90 60 90 90 mA
DC Forward Voltage 6 6 6 6 V
(Resistor Lamps Only)
Reverse Voltage (I
R
= 100 µA) 5 5 5 5 5 5 5 V
Transient Forward Current
[3]
2000 500 500 500 500 500 500 mA
(10 µs Pulse)
Operating Temperature Range:
Non-Resistor Lamps -55 to +100 -40 to +100 55 to +100 -40 to +100 -20 to +100 °C
Resistor Lamps -40 to +85 -20 to +85
Storage Temperature Range -55 to +100 °C
For Thru Hole Devices 260°C for 5 seconds
Wave Soldering Temperature
[1.6 mm (0.063 in.) from body]
For Surface Mount Devices: 260°C for 20 seconds
Reow Soldering Temperature
Notes:
1. See Figure 5 for current derating vs. ambient temperature. Derating is not applicable to resistor lamps.
2. Refer to Figure 6 showing Max. Tolerable Peak Current vs. Pulse Duration to establish pulsed operating conditions.
3. The transient peak current is the maximum non-recurring peak current the device can withstand without failure. Do not operate these lamps at
this high current.