Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Yellow Circular 5 mm 6.5 mcd 60 ° 20 mA 2 V

Description

This family of T-1

tinted, diffused LED lamps is

widely used in general purpose indicator applications.

Diusants, tints, and optical design are balanced to yield

superior light output and wide viewing angles. Several

intensity choices are available in each color for increased

design exibility.

Features

• High intensity

• Choice of 4 bright colors

– High Eciency Red

– Orange

– Yellow

– High Performance Green

• Popular T-1

diameter package

• Selected minimum intensities

• Wide viewing angle

• General purpose leads

• Reliable and rugged

• Available on tape and reel

Selection Guide

Luminous Intensity

Material/ Iv (mcd) at 10 mA

Color Part Number Min. Max.

HLMP-3301 5.4 –

HLMP-3301-D00xx 2.1 –

GaP HER HLMP-3301-F00xx 5.4 –

HLMP-3301-FG0xx 5.4 17.2

HLMP-3762 8.6 –

HLMP-3762-G00xx 8.6 –

HLMP-3401 5.7 –

HLMP-3401-E00xx 5.7 –

HLMP-3401-EF0xx 5.7 18.4

GaP Yellow HLMP-3401-EFBxx 5.7 18.4

HLMP-3862 9.2 –

HLMP-3862-F00xx 9.2 –

HLMP-3862-FGBxx 9.2 29.4

HLMP-D401 5.4 –

GaP Orange HLMP-D401-D00xx 2.1 –

HLMP-D401-EF0xx 3.4 10.8

HLMP-D401-F00xx 5.4 –

HLMP-3507 4.2 –

HLMP-3507-D00xx 4.2 –

GaP Green HLMP-3507-EF0xx 6.7 21.2

HLMP-3962 10.6 –

HLMP-3962-F00xx 10.6 –

HLMP-3301, HLMP-3401, HLMP-3507, HLMP-3762,

HLMP-3862, HLMP-3962, HLMP-D401

T-1

(5 mm) Diused LED Lamps

Data Sheet

Summary of content (11 pages)

PAGE 1
HLMP-3301, HLMP-3401, HLMP-3507, HLMP-3762, HLMP-3862, HLMP-3962, HLMP-D401 T-13/4 (5 mm) Diffused LED Lamps Data Sheet Description Features T-1 3/ 4 This family of tinted, diffused LED lamps is widely used in general purpose indicator applications. Diffusants, tints, and optical design are balanced to yield superior light output and wide viewing angles. Several intensity choices are available in each color for increased design flexibility.
PAGE 2
Part Numbering System HLMP - x x xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads B1: Right Angle Housing, Uneven Leads B2: Right Angle Housing, Even Leads DD: Ammo Pack R4: Tape & Reel, Counter Clockwise Color Bin Options 0: Full Color Bin Distribution B: Color Bins 2 & 3 only Maximum Iv Bin Options 0: Open (no max.
PAGE 3
Optical/Electrical Characteristics at TA = 25°C Symbol Parameter Color Min. Typ. Max. Units Test Condition 2q1/2 IF = 10 mA See Note 1 Included Angle High Efficiency Red 60 Deg.
PAGE 4
Absolute Maximum Ratings at TA = 25°C Parameter HER/Orange Yellow Green/ Emerald Green Units Peak Forward Current 90 60 90 mA Average Forward Current[1] 25 20 25 mA DC Current[2] 30 20 30 mA Power Dissipation[3] 135 85 135 mW Reverse Voltage (IR = 100 µA) 5 5 5 V Transient Forward Current[4] 500 500 500 mA LED Junction Temperature 110 110 110 °C Operating Temperature Range -40 to +100 -40 to +100 -20 to +100 °C Storage Temperature Range -40 to +100 -40 to +10
PAGE 5
T-13/4 High Efficiency Red, Orange Diffused Lamps Figure 2. Forward current vs. forward voltage characteristics Figure 3. Relative luminous intensity vs. DC forward current Figure 5. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings) Figure 6. Relative luminous intensity vs. angular displacement Figure 4. Relative efficiency (luminous intensity per unit current) vs.
PAGE 6
T-13/4 Yellow Diffused Lamps Figure 7. Forward current vs. forward voltage characteristics Figure 8. Relative luminous intensity vs. forward current Figure 10. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings) Figure 11. Relative luminous intensity vs. angular displacement Figure 9. Relative efficiency (luminous intensity per unit current) vs.
PAGE 7
T-13/4 Green/Emerald Green Diffused Lamps Figure 12. Forward current vs. forward voltage characteristics Figure 13. Relative luminous intensity vs. DC forward current Figure 15. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings) Figure 16. Relative luminous intensity vs. angular displacement Figure 14. Relative efficiency (luminous intensity per unit current) vs.
PAGE 8
Intensity Bin Limits Color Bin Red/Orange Yellow Intensity Range (mcd) Min. Max. D 2.4 3.8 E 3.8 6.1 F 6.1 9.7 G 9.7 15.5 H 15.5 24.8 I 24.8 39.6 J 39.6 63.4 K 63.4 101.5 L 101.5 162.4 M 162.4 234.6 N 234.6 340.0 O 340.0 540.0 P 540.0 850.0 Q 850.0 1200.0 R 1200.0 1700.0 S 1700.0 2400.0 T 2400.0 3400.0 U 3400.0 4900.0 V 4900.0 7100.0 W 7100.0 10200.0 X 10200.0 14800.0 Y 14800.0 21400.0 Z 21400.0 30900.0 E 6.5 10.3 F 10.3 16.
PAGE 9
Intensity Bin Limits, continued Color Bin Green Intensity Range (mcd) Min. Max. D 4.7 7.6 E 7.6 12.0 F 12.0 19.1 G 19.1 30.7 H 30.7 49.1 I 49.1 78.5 J 78.5 125.7 K 125.7 201.1 L 201.1 289.0 M 289.0 417.0 N 417.0 680.0 O 680.0 1100.0 P 1100.0 1800.0 Q 1800.0 2700.0 R 2700.0 4300.0 S 4300.0 6800.0 T 6800.0 10800.0 U 10800.0 16000.0 V 16000.0 25000.0 W 25000.0 40000.0 Maximum tolerance for each bin limit is ±18%.
PAGE 10
Mechanical Option Matrix Mechanical Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag 01 Tape & Reel, crimped leads, minimum increment 1300 pcs/bag 02 Tape & Reel, straight leads, minimum increment 1300 pcs/bag B1 Right Angle Housing, uneven leads, minimum increment 500 pcs/bag B2 Right Angle Housing, even leads, minimum increment 500 pcs/bag DD Ammo Pack, straight leads with minimum increment 2K/pack R4 Tape & Reel, straight leads, counter clockwise, anode lead leaving
PAGE 11
Precautions Lead Forming • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering into PC board. • If lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress induced to LED package. Otherwise, cut the leads of LED to length after soldering process at room temperature. The solder joint formed will absorb the mechanical stress of the lead cutting from traveling to the LED chip die attach and wirebond.