Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Yellow Circular 5 mm 6.5 mcd 60 ° 20 mA 2 V

Description

This family of T-1

tinted, diffused LED lamps is

widely used in general purpose indicator applications.

Diffusants, tints, and optical design are balanced to yield

superior light output and wide viewing angles. Several

intensity choices are available in each color for increased

design ﬂexibility.

Features

• High intensity

• Choice of 4 bright colors

– High Efﬁciency Red

– Orange

– Yellow

– High Performance Green

• Popular T-1

diameter package

• Selected minimum intensities

• Wide viewing angle

• General purpose leads

• Reliable and rugged

• Available on tape and reel

HLMP-3301, HLMP-3401, HLMP-3507, HLMP-3762,

HLMP-3862, HLMP-3962, HLMP-D401

Selection Guide

Luminous Intensity

Material/ Iv (mcd) at 10 mA

Color Part Number Min. Max.

HLMP-3301 5.4 –

HLMP-3301-D00xx 2.1 –

GaP HER HLMP-3301-F00xx 5.4 –

HLMP-3301-FG0xx 5.4 17.2

HLMP-3762 8.6 –

HLMP-3762-G00xx 8.6 –

HLMP-3401 5.7 –

HLMP-3401-E00xx 5.7 –

HLMP-3401-EF0xx 5.7 18.4

GaP Yellow HLMP-3401-EFBxx 5.7 18.4

HLMP-3862 9.2 –

HLMP-3862-F00xx 9.2 –

HLMP-3862-FGBxx 9.2 29.4

HLMP-D401 5.4 –

GaP Orange HLMP-D401-D00xx 2.1 –

HLMP-D401-EF0xx 3.4 10.8

HLMP-D401-F00xx 5.4 –

HLMP-3507 4.2 –

HLMP-3507-D00xx 4.2 –

GaP Green HLMP-3507-EF0xx 6.7 21.2

HLMP-3962 10.6 –

HLMP-3962-F00xx 10.6 –

HLMP-3301

T-1

(5 mm) Diffused LED Lamps

Data Sheet

Summary of content (12 pages)

PAGE 1
HLMP-3301 T-13/4 (5 mm) Diffused LED Lamps Data Sheet HLMP-3301, HLMP-3401, HLMP-3507, HLMP-3762, HLMP-3862, HLMP-3962, HLMP-D401 Description Features This family of T-13/ 4 tinted, diffused LED lamps is widely used in general purpose indicator applications. Diffusants, tints, and optical design are balanced to yield superior light output and wide viewing angles. Several intensity choices are available in each color for increased design flexibility.
PAGE 2
Part Numbering System HLMP - x x xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads B1: Right Angle Housing, Uneven Leads B2: Right Angle Housing, Even Leads DD: Ammo Pack R4: Tape & Reel, Counter Clockwise Color Bin Options 0: Full Color Bin Distribution B: Color Bins 2 & 3 only Maximum Iv Bin Options 0: Open (no max.
PAGE 3
Optical/Electrical Characteristics at TA = 25°C Symbol Parameter Color Min. Typ. Max. Units 2q1/2 Included Angle High Efficiency Red 60 Deg.
PAGE 4
Absolute Maximum Ratings at TA = 25°C Parameter HER/Orange Yellow Peak Forward Current 90 60 Average Forward Current[1] 25 20 DC Current[2] 30 20 Power Dissipation[3] 135 85 Reverse Voltage (IR = 100 µA) 5 5 Transient Forward Current[4] 500 500 (10 µsec Pulse) LED Junction Temperature 110 110 Operating Temperature Range -55 to +100 -55 to +100 Green/ Emerald Green 90 25 30 135 5 500 Units mA mA mA mW V mA 110 -20 to +100 °C °C Storage Temperature Range -55 to +100 Notes: 1.
PAGE 5
T-13/4 High Efficiency Red, Orange Diffused Lamps Figure 2. Forward current vs. forward voltage characteristics Figure 3. Relative luminous intensity vs. DC forward current Figure 5. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings) Figure 6. Relative luminous intensity vs. angular displacement Figure 4. Relative efficiency (luminous intensity per unit current) vs.
PAGE 6
T-13/4 Yellow Diffused Lamps Figure 7. Forward current vs. forward voltage characteristics Figure 8. Relative luminous intensity vs. forward current Figure 10. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings) Figure 11. Relative luminous intensity vs. angular displacement Figure 9. Relative efficiency (luminous intensity per unit current) vs.
PAGE 7
T-13/4 Green/Emerald Green Diffused Lamps Figure 12. Forward current vs. forward voltage characteristics Figure 13. Relative luminous intensity vs. DC forward current Figure 15. Maximum tolerable peak current vs. pulse duration. (IDC MAX as per MAX ratings) Figure 16. Relative luminous intensity vs. angular displacement Figure 14. Relative efficiency (luminous intensity per unit current) vs.
PAGE 8
Intensity Bin Limits Color Bin D E F G H I J K L M N Red/Orange O P Q R S T U V W X Y Z E F G H I J K L M Yellow N O P Q R S T U V W Intensity Range (mcd) Min. Max. 2.4 3.8 3.8 6.1 6.1 9.7 9.7 15.5 15.5 24.8 24.8 39.6 39.6 63.4 63.4 101.5 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 6.5 10.3 10.3 16.6 16.6 26.5 26.5 42.3 42.3 67.7 67.7 108.
PAGE 9
Intensity Bin Limits, continued Color Bin D E F G H I J K L Green M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 4.7 7.6 7.6 12.0 12.0 19.1 19.1 30.7 30.7 49.1 49.1 78.5 78.5 125.7 125.7 201.1 201.1 289.0 289.0 417.0 417.0 680.0 680.0 1100.0 1100.0 1800.0 1800.0 2700.0 2700.0 4300.0 4300.0 6800.0 6800.0 10800.0 10800.0 16000.0 16000.0 25000.0 25000.0 40000.0 Maximum tolerance for each bin limit is ±18%.
PAGE 10
Mechanical Option Matrix Mechanical Option Code 00 01 02 B1 B2 DD R4 Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, crimped leads, minimum increment 1300 pcs/bag Tape & Reel, straight leads, minimum increment 1300 pcs/bag Right Angle Housing, uneven leads, minimum increment 500 pcs/bag Right Angle Housing, even leads, minimum increment 500 pcs/bag Ammo Pack, straight leads with minimum increment 2K/pack Tape & Reel, straight leads, counter clockwise, anode lead leaving the reel first
PAGE 11
Precautions Lead Forming • The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering into PC board. • If lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress induced to LED package.Otherwise,cut the leads of LED to length after soldering process at room temperature.The solder joint formed will absorb the mechanical stress of the lead cutting from traveling to the LED chip die attach and wirebond.
PAGE 12
For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2008 Avago Technologies Limited. All rights reserved.