Datasheet

3
Absolute Maximum Ratings at T
A
= 25°C
Parameter HER/Green Yellow/Green Units
Peak Forward Current 90 60 mA
Average Forward Current
[1,2]
(Total) 25 20 mA
DC Current
[2]
(Total) 30 20 mA
Power Dissipation
[3]
(Total) 135 135 mW
Operating Temperature Range –20 to +100 –20 to +100 °C
Storage Temperature Range –55 to +100 –55 to +100 °C
Reverse Voltage (I
R
= 100 µA) 5 5 V
Transient Forward Current
[4]
500 500 mA
(10 µsec Pulse)
Notes:
1. See Figure 5 to establish pulsed operating conditions.
2. The combined simultaneous current must not exceed the maximum.
3. The combined simultaneous current must not exceed the maximum.
4. The transient peak current is the maximum non-recurring current that can be applied to the device without damaging the LED die and wirebond. It is
not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings.
Notes:
1. The dominant wavelength, l
d
, is derived from the CIE Chromaticity Diagram and represents the single wavelength which defines the color of the device.
2. q
1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. Radiant intensity, le, in watts steradian, may be found from the equation le = Iv/h
V,
where Iv is the luminous intensity in candelas and h V is the luminous
efficacy in lumens/watt.
Electrical/Optical Characteristics at T
A
= 25˚C
High Efficiency Red Green Yellow
Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Test Condition
l
PEAK
Peak 635 568 583 nm 20 mA
Wavelength
l
d
Dominant 626 570 585 nm 20 mA
Wavelength
[1]
t
s
Speed of 90 260 90 ns
Response
C Capacitance 11 18 15 pF V
F
= 0, f = 1 MHz
V
F
Forward 1.9 2.6 2.2 3.0 2.1 2.6 V 20 mA
Voltage
V
R
Reverse 5 5 5 V I
R
= 100 µA
Voltage
Rq
J-PIN
Thermal 210 210 210 °C/W Junction-to-
Resistance Cathode Lead
2q
1/2
Included Angle
between half
luminous
intensity points
[2]
HLMP-40xx 65 65 65 degree
HLMP-08xx 100 100 100
h
V
Luminous 145 595 500 lm/W
Efficacy
[3]