Datasheet

2
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. THE LEADS ARE MILD STEEL, SOLDER DIPPED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040")
DOWN THE LEADS, UNLESS OTHERWISE NOTED.
Package Dimensions
Absolute Maximum Ratings at T
A
= 25°C
DC Forward Current
[1,4,5]
50 mA
Peak Forward Current
[2]
200 mA
Time Average Input Power
[2]
103 mW
Transient Forward Current
[3]
(10 µs Pulse) 500 mA
Reverse Voltage (I
R
= 100 µA) 5 V
Operating Temperature Range -40 to 100°C
Storage Temperature -40 to 100°C
Junction Temperature 110°C
Wave Soldering Temperature [1.59 mm (0.063 in.) from Body] 250°C for 3 seconds
Solder Dipping Temperature [1.59 mm (0.063 in.) from Body] 260°C for 5 seconds
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Time Average Power as specified in Figure 5.
3. The transient peak current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bonds.
4. Drive Currents between 10 mA and 30 mA are recommended for best long term performance.
5. Operation at currents below 10 mA is not recommended, please contact your Avago sales representative.
3.18 (0.125)
2.67 (0.105)
24.10
(0.95)
MIN.
1.27
(0.050)
NOM.
1.02
(0.040)
6.35 (0.250)
5.58 (0.220)
0.45
(0.018)
SQUARE
NOMINAL
CATHODE
2.54
(0.100)
NOM.
NOM.
4.70 (0.185)
4.19 (0.165)
3.43 (0.135)
2.92 (0.115)