Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesLED wired Amber Circular 3 mm 200 mcd 45 ° 50 mA 1.9 V

Features

• Outstanding LED material efficiency

• High light output over a wide range of currents

• Low electrical power dissipation

• Colors: 590/592 nm Amber, 615/617 nm

Reddish-Orange

Applications

• Outdoor message boards

• Safety lighting equipment

• Signaling applications

• Emitter for emitter/detector applications

• Changeable message signs

• Portable equipment

• Medical equipment

• Automotive lighting

• Alternative to incandescent lamps

Description

These untinted, non-diffused, solid state lamps

utilize the latest absorbing/transparent substrate

aluminum indium gallium phosphide (AlInGaP)

LED technology. These materials have a very high

luminous efficiency, capable of producing high

light output over a wide range of drive currents. In

addition, these LED lamps are at wavelengths

ranging from amber to reddish orange.

SunPower Series

HLMA-KL00 Series, HLMA-KH00 Series

HLMA-Kx00

T-1 (3 mm), High Performance

AlInGaP LED Lamps

Data Sheet

Summary of content (4 pages)

PAGE 1
HLMA-Kx00 T-1 (3 mm), High Performance AlInGaP LED Lamps Data Sheet SunPower Series HLMA-KL00 Series, HLMA-KH00 Series Description Features These untinted, non-diffused, solid state lamps utilize the latest absorbing/transparent substrate aluminum indium gallium phosphide (AlInGaP) LED technology. These materials have a very high luminous efficiency, capable of producing high light output over a wide range of drive currents.
PAGE 2
Package Dimensions 3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115) 6.35 (0.250) 5.58 (0.220) 4.70 (0.185) 4.19 (0.165) 1.02 NOM. (0.040) 0.45 SQUARE (0.018) NOMINAL 24.10MIN. (0.95) 1.27 (0.050) NOM. 2.54 NOM. (0.100) CATHODE NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. THE LEADS ARE MILD STEEL, SOLDER DIPPED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040") DOWN THE LEADS, UNLESS OTHERWISE NOTED.
PAGE 3
Optical Characteristics at TA = 25°C Part Number HLMAKL00 KH00 Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 35 200 35 200 Color, Dominant Wavelength ld[2] (nm) Typ. 590 615 Peak Wavelength lpeak (nm) Typ. 592 621 Viewing Angle 2q1/2 Degrees[3] Typ. 45 45 Luminous Efficacy hv (lm/w) 480 263 Notes: 1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2.
PAGE 4
2.5 1.5 1.0 0.5 40 35 30 25 Rθ J-A = 618 °C/W RθJ-A = 412 °C/W 20 15 10 0 10 20 30 40 IF – DC FORWARD CURRENT – mA Figure 3. Relative luminous intensity vs. forward current. Derating based on TJMAX. 50 f > 1 KHz 50 40 f > 100 Hz 20 10 0 0 10 20 30 40 50 60 70 80 90 100 50 Figure 4. Maximum forward current vs. ambient temperature. Derating based on TJMax = 110 °C. 150 200 Figure 5. Maximum average current vs. peak forward current. 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.