Datasheet

ManualsBrandsBROADCOM ManualsOptoelectronics & DisplaysPhototransistor-Optocoupler SO 4 Type (misc.) AC-FotoTX-Coupler 1-channel

Description

The HCPL-354 contains a phototransistor, optically coupled

to two light emitting diodes connected inverse parallel. It

can operate directly by AC input current. It is packaged in

a 4-pin mini-at SMD package with a 2.0 mm prole. The

small dimension of this product allows signicant space

saving. The package volume is 30% smaller than that of

conventional DIP type. Input-output isolation voltage is

3750 V

rms

. Response time, t

, is typically 4 µs and minimum

CTR is 20% at input current of ±1 mA.

Functional Diagram

CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage

and/or degradation which may be induced by ESD.

Features

• AC input response

• Current transfer ratio

(CTR: min. 20% at I

= ± 1 mA, V

= 5 V)

• Isolation voltage between input and output

iso

= 3,750 V

rms

)

• Subminiature type

(The volume is smaller than that of conventional DIP

type by as far as 30%)

• Mini-at package

• 2.0 mm prole

• UL approved

• CSA approved

• IEC/EN/DIN EN 60747-5-2 approved

• Options available:

– IEC/EN/DIN EN 60747-5-2 approvals (060)

Applications

• Detecting or monitoring AC signals

• Programmable controllers

• AC/DC-input modules

• AC line/digital logic isolation

1. ANODE, CATHODE

2. CATHODE, ANODE

3. EMITTER

4. COLLECTOR

HCPL-354

AC Input Phototransistor Optocoupler

SMD Mini-Flat Type

Data Sheet

Lead (Pb) Free

RoHS 6 fully

compliant

RoHS 6 fully compliant options available;

-xxxE denotes a lead-free product

Summary of content (6 pages)

PAGE 1
HCPL-354 AC Input Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description The HCPL-354 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel. It can operate directly by AC input current. It is packaged in a 4-pin mini-flat SMD package with a 2.0 mm profile. The small dimension of this product allows significant space saving.
PAGE 2
Ordering Information HCPL-354 is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA 88324.
PAGE 3
Package Outline Drawing HCPL-354-000E 2.54 ± 0.25 3.60 ± 0.3 354 LEAD FREE Y WW 5.30 ± 0.3 DATE CODE 2.00 ± 0.2 4.40 ± 0.2 0.40 ± 0.1 + 0.2 7.00 – 0.7 0.10 ± 0.1 RANK DIMENSIONS IN MILLIMETERS. HCPL-354-060E 2.54 ± 0.25 3.60 ± 0.3 354 V LEAD FREE Y WW 5.30 ± 0.3 DATE CODE 2.00 ± 0.2 4.40 ± 0.2 0.40 ± 0.1 + 0.2 7.00 – 0.7 0.10 ± 0.1 RANK DIMENSIONS IN MILLIMETERS.
PAGE 4
Absolute Maximum Ratings Parameters Storage Temperature Ambient Operating Temperature Lead Solder Temperature for 10s (1.6 mm below seating plane) Average Forward Current Input Power Dissipation Collector Current Collector-Emitter Voltage Emitter-Collector Voltage Collector Power Dissipation Total Power Dissipation Isolation Voltage (AC for 1 minute, R.H. = 40 ~ 60%)[1] Symbol Min. TS –55 TA –55 Tsol Max.
PAGE 5
150 40 30 100 10 0 25 50 75 100 125 TA – AMBIENT TEMPERATURE – °C Figure 1. Forward current vs. ambient temperature. HCPL-354 fig 1 IF – FORWARD CURRENT – mA 500 TA = 75°C TA = 50°C TA = 25°C 200 100 TA = 0°C TA = -25°C 50 20 10 5 2 0 5 10 15 20 25 30 0 -55 0 50 80 100 TA – AMBIENT TEMPERATURE – °C Figure 7. Relative current transfer ratio vs. ambient HCPL-354 fig 7 temperature.
PAGE 6
RESPONSE TIME – µs 50 20 VCE = 2 V IC = 2 mA TA = 25°C VCE = 2 V IC = 2 mA tr TA = 25°C 10 VOLTAGE GAIN AV – dB 100 tf 5 td 2 ts 1 0.5 0 RL = 10 k -10 RL = 1 k RL = 100  0.2 0.1 0.1 0.2 0.5 1 2 5 -20 0.2 10 RL – LOAD RESISTANCE – kΩ 5 10 100 1000 f – FREQUENCY – kHz Figure 10. Response time vs. load resistance. Figure 11. Frequency response. HCPL-354 fig 10 HCPL-354 fig 11 VCC INPUT 0.5 1 2 INPUT RL RD OUTPUT 10% OUTPUT 90% td ts tr tf Figure 12.