Datasheet

6
Recommended Operating Conditions
Parameter Symbol Min. Max. Units
Input Current, Low Level I
IL
0 250 µA
Input Current, High Level I
IH
5* 60 mA
Supply Voltage, Output V
CC
4.5 5.5 V
High Level Enable Voltage V
EH
2.0 V
CC
V
Low Level Enable Voltage V
EL
00.8 V
Fan Out (@ R
L
= 1 kΩ)N 5TTL Loads
Output Pull-up Resistor R
L
330 4 K Ω
Operating Temperature T
A
070 °C
*The initial switching threshold is 5 mA or less. It is recommended that an input current between
6.3 mA and 10 mA be used to obtain best performance and to provide at least 20% LED degradation
guardband.
Absolute Maximum Ratings (No Derating Required up to 85°C)
Parameter Symbol Min. Max. Units
Storage Temperature T
S
-55 125 °C
Operating Temperature T
A
-40 85 °C
Forward Input Current I
I
60 mA
Reverse Input Current I
IR
60 mA
Input Current, Pin 4 -10 10 mA
Supply Voltage (1 Minute Maximum) V
CC
7V
Enable Input Voltage (Not to Exceed V
CC
by V
E
V
CC
+ 0.5 V
more than 500 mV)
Output Collector Current I
O
50 mA
Output Collector Voltage (Selection for Higher V
O
7V
Output Voltages up to 20 V is Available.)
Output Collector Power Dissipation P
O
40 mW
Lead Solder Temperature T
LS
260°C for 10 sec., 1.6 mm below
seating plane
Solder Reflow Temperature Profile See Package Outline Drawings section