User's Guide

User's Guide Before You Begin
Page 1-7
1.4 The Two Power LEDs
The Power On LED
Below is how the LED would behave in different situations:
Off
System is powered off, or in Hibernate mode.
On
• System is powered by AC adapter, and/or
• System is in full operation.
Blinking
System is in Standby mode.
The Battery Pack LED
Below is how the LED would behave in different situations:
On
Battery pack is being recharged: fast-charge or pre-charge.
Blinking
• Battery pack is consuming down to 10% level.
• Battery pack is waiting for recharge when battery
temperature is too high after discharge.
• Battery pack error.
Off
Battery pack is not under recharge.
Note: The Two Power LEDs are located near the Five Status LEDs. For exact
location, please refer to the Panoramic View diagram in Chapter 1.2.
For more details on Standby and Hibernate, please refer to Power Options (for
Windows Systems) in the Control Panel of your Microsoft Windows operating
system.