Datasheet

3
Table 1. Absolute Maximum Ratings (T
J
= 25 °C)
Parameter Red Green & Blue Unit
DC forward current
[1]
50 25 mA
Peak forward current
[2]
100 100 mA
Power dissipation 125 90 mW
Maximum junction temperature T
j
max 110
°C
Operating temperature range - 40 to + 100
[3]
°C
Storage temperature range - 40 to + 100
°C
Note:
1. Derate linearly as shown in Figure 7 to Figure 10
2. Duty Factor = 10% Frequency = 1 kHz
Table 2. Optical Characteristics (T
J
= 25 °C)
Color
Luminous Intensity, I
V
(mcd)
@I
F
= 20 mA
[1]
Dominant Wavelength, ld
(nm) @I
F
= 20 mA
[2]
Peak Wavelength, l
P
(nm) @I
F
= 20 mA
Viewing Angle,
2q½ (°)
[3]
Test Current
(mA)Min. Typ. Max. Min. Typ. Max. Typ. Typ.
Red 560 650 1125 617 623 627 630 120 20
Green 1400 1900 2850 525 529 537 522 120
Blue 285 384 560 465 469 475 465 120
Note:
1. Luminous intensity, IV is measured at the mechanical axis of the LED package at a single current pulse condition. The actual peak of the spatial
radiation pattern may not be aligned with the axis.
2. Dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. q
1/2
is the o-axis angle where the luminous intensity is ½ of the peak intensity.
Table 3. Electrical Characteristics (T
J
= 25 °C)
Color Forward Voltage, V
F
(V)
@I
F
= 20 mA
[1]
Reverse Voltage, V
R
(V)
@I
R
= 100 µA
[2]
Reverse Voltage, V
R
(V)
@I
R
= 10 µA
[2]
Thermal Resistance,
R
qJ-S
(°C/W)
Min. Typ. Max. Min. Min. 1 chip on 3 chips on
Red 1.8 2.1 2.5 4.0 -- 280 330
Green 2.8 3.1 3.6 -- 4.0 240 357
Blue 2.8 3.1 3.6 -- 4.0 240 357
Note:
1. Tolerance = ±0.1 V.
2. Indicates product nal testing condition. Long0term reverse bias is not recommended.