Datasheet

3
Table 1. Absolute Maximum Ratings (T
J
= 25 °C)
Parameter Red Green & Blue Unit
DC forward current
[1]
50 30 mA
Peak forward current
[2]
100 100 mA
Power dissipation 125 114 V
Reverse voltage
[3]
4 V
Junction temperature 125
°C
Operating temperature range -40 to + 110
°C
Storage temperature range -40 to + 120
°C
Notes:
1. Derate linearly as shown in Figure 7 to Figure 10.
2. Duty Factor = 10% Frequency = 1 kHz
3. Driving the LED in reverse bias condition is suitable for the short term only
Table 2. Optical Characteristics (T
J
= 25 °C)
Color
Luminous Intensity,
I
V
(mcd)
@ I
F
= 20 mA
[1]
Dominant Wavelength,
λ
d
(nm)
@ I
F
= 20 mA
[2]
Peak Wavelength,
λ
p
(nm)
@ I
F
= 20 mA
Viewing
Angle,
2θ
½
(°)
[3]
Luminous
Ecacy,
η
V
(lm/W)
Luminous
Eciency,
η
e
(lm/W)
Min. Typ. Max. Min. Typ. Max. Typ. Typ. Typ. Typ.
Red 355 450 715 618 622 628 629 120 210 22
Green 450 560 900 525 530 537 521 120 535 25
Blue 140 180 285 465 470 477 464 120 84 5
Notes:
1. Luminous intensity, I
V
is measured at the mechanical axis of the LED package at a single current pulse condition. The actual peak of the spatial
radiation pattern may not be aligned with the axis.
2. Dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. θ
½
is the o-axis angle where the luminous intensity is ½ of the peak intensity.
4. Φ
V
is the total luminous ux output as measured with an integrating sphere at mono pulse condition.
Table 3. Electrical Characteristics (T
J
= 25 °C)
Color
Forward Voltage, V
F
(V)
@ I
F
= 20 mA
[1]
Reverse Voltage, V
R
(V)
@ I
R
= 100 mA
[2]
Reverse Voltage, V
R
(V)
@ I
R
= 10 mA
[2]
Thermal Resistance,
Rθ
J-S
(°C/W)
Min. Typ. Max. Min. Min. 1 chip on 3 chips on
Red 1.8 2.1 2.5 4.0 -- 280 280
Green 2.8 3.2 3.8 -- 4.0 180 230
Blue 2.8 3.2 3.8 -- 4.0 180 230
Notes:
1. Tolerance ± 0.1 V.
2. Indicates product nal testing condition. Long-term reverse bias is not recommended.