Datasheet

5
Figure 8. Recommended Soldering Pad PatternFigure 7. Recommended Pick and Place Nozzle Size
END
THERE SHALL BE A
MINIMUM OF 160 mm
OF EMPTY COMPONENT
POCKETS SEALED WITH
COVER TAPE.
MOUNTED
WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 400 mm
OF EMPTY COMPONENT
POCKETS SEALED WITH
COVER TAPE.
START
USER FEED
DIRECTION
Figure 9. Tape Leader and Trailer Dimensions
Figure 10. Tape Dimensions (Unit: mm)
3.85 ±0.1
2.15 ±0.1 3.10 ±0.1
4.00 ±0.1
4.00 ±0.1
2.00 ±0.05
3.5 ±0.1
8.00 ±0.1
1.55 ±0.05
1.75 ±0.1
Cathode Marking
2.60
4.50
1.50
SOLDER RESIST
OD
ID = 1.7 mm
OD = 3.5 mm
ID