Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesSMD LED PLCC4 White 2125 mcd 120 ° 30 mA 3.2 V

ASMT‐SxB5‐Nxxxx

SurfaceMountLEDIndicator 



Description

Avago Power PLCC‐4 is an extension of our PLCC‐2 SMT

LEDs.The packagecanbedriven athighercurrentdueto

its superior package design. The product is able to

dissipate heat more efficiently compared to the

conventional PLCC‐2 SMT LEDs. In proportion to the

increase in dri

ving current, this family of LEDs is able to

producehigherlightoutputcomparedtotheconventional

PLCC‐2SMTLEDs.



These SMT LEDs have higher reliability and better

performanceandaredesignedtoworkunderawiderange

of environmental conditions. This higherreliability makes

them suitable for use un

der harsh environment and

conditions like automotive. In addition, they are also

suitabletobeusedinelectronicsignsandsignals.



To facilitate easy pick and place assembly, the LEDs are

packed in EIA‐compliant tape and reel. Every reel will be

shipped in single intensity and color bin, to provide clos

e

uniformity.



TheseLEDsarecompatiblewithIRsolderreflowprocess.



Features

 IndustrystandardPLCC‐4

 HighreliabilityLEDpackage

 HighbrightnessusingInGaNdicetechnologies

 Highopticalefficiency

 Higherambienttemperatureatthesamecurrent

possiblecomparedtoPLCC‐2

 Availableinfullselectionofcolors

 Superwideviewingangleat120˚

 Availablein8mmcarriertapeon7‐inchree

l

 CompatiblewithbothIRandTTWsolderingprocess

 Stabile&Consistentperformancewithminimum

degradationwithSiliconeEncapsulation

 JEDECMSL2a



Applications

 Interiorautomotive

‐ Instrumentpanelbacklighting

‐ Centralconsolebacklighting

‐ Cabinbacklighting

 Electronicsignsandsignals

‐ Interiorfullcolorsign

‐ Variablemessagesign

 Officea

utomation,homeappliances,industrial

equipment

‐ Frontpanelbacklighting

‐ Pushbuttonbacklighting

‐ Displaybacklighting



CAUTION:ASMT‐SxB5‐NxxxxLEDsareClass1CESDsensitive.Pleaseobserveappropriateprecautionsduringhandling

andprocessing.RefertoAva

goApplicationNoteAN‐1142foradditionaldetails.

Summary of content (9 pages)

PAGE 1
ASMT‐SxB5‐Nxxxx Surface Mount LED Indicator Description Avago Power PLCC‐4 is an extension of our PLCC‐2 SMT LEDs. The package can be driven at higher current due to its superior package design. The product is able to dissipate heat more efficiently compared to the conventional PLCC‐2 SMT LEDs. In proportion to the increase in driving current, this family of LEDs is able to produce higher light output compared to the conventional PLCC‐2 SMT LEDs.
PAGE 2
Package Dimensions NOTE: ALL DIMENSIONS IN MILLIMETERS. ELECTRICAL CONNECTION BETWEEN ALL CATHODES IS RECOMMENDED. Table 1. Device Selection Guide Color Blue Green Part Number ASMT‐SBB5‐NT703 ASMT‐SGB5‐NW703 Min IV (mcd) 355.00 1400.00 Max. IV (mcd) 715.00 2850.00 Test Current (mA) 30 30 Dice Technology InGaN InGaN Notes: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2.
PAGE 3
Table 2. Absolute Maximum Ratings (TA = 25 °C) Parameters ASMT‐SxB5 [1] DC Forward Current 30mA Peak Forward Current [2] 90mA Power Dissipation 114 mW Reverse Voltage 5V Junction Temperature 110 °C Operating Temperature ‐ 40 °C to + 100 °C Storage Temperature ‐ 40 °C to + 100 °C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty Factor = 10%, Frequency = 1kHz. 3. Drive current between 10 mA and 20 mA is recommended for best long term performance. 4. Operation at current below 5 mA is not recommended.
PAGE 4
1 0.9 RELATIVE INTENSITY 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 530 580 630 680 730 780 WAVELENGTH ‐ nm Figure 1. Relative Intensity Vs. Wavelength (ASMT‐SBB5 and ASMT SGB5) 35 1.2 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 30 mA) FORWARD CURRENT ‐ mA 30 25 20 15 10 5 1.0 0.8 0.6 0.4 0.2 0 0 1 2 3 FORWARD VOLTAGE ‐ V 4 0.0 0 5 10 15 20 25 DC FORWARD CURRENT ‐ mA Figure 2. Forward Current Vs. Forward Voltage Figure 3. Relative Intensity Vs.
PAGE 5
1.0 30 0.9 25 NORMALIZED INTENSITY MAXIMUM FORWARD CURRENT ‐ mA 35 20 15 10 5 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 AMBIENT TEMPERATURE ‐ °C 0.0 -90 -60 -30 0 30 60 90 ANGULAR DISPLACEMENT ‐ DEGREES Figure 4. Maximum Forward Current Vs. Ambient Temperature. Derated Based on TJMAX = 110°C, RθJA=300°C/W Figure 5. Radiation Pattern Note: Diameter "D" should be smaller than 2.
PAGE 6
Figure 8. Recommended Soldering Pad Pattern Figure 9.
PAGE 7
Figure 10. Tape Dimensions Figure 11. Reel dimensions Figure 12.
PAGE 8
Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body only. Please refer to Avago Application Note AN 5288 for detail information.
PAGE 9
Intensity Bin Select (X2X3) Individual reel will contain parts from one half bin only Min IV Bin X2 X3 0 A 2 3 4 5 B 6 7 8 9 Full Distribution 1 half bins starting from X21 2 half bins starting from X21 3 half bins starting from X21 4 half bins starting from X21 2 half bins starting from X21 1 half bins starting from X22 2 half bins starting from X22 3 half bins starting from X22 4 half bins starting from X22 2 half bins starting from X22 Intensity Bin Limits Bin ID Min. (mcd) Max. (mcd) P1 45.00 56.