Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesSMD LED PLCC4 Cold white 120 ° 150 mA 3.6 V

ASMT-QWBE-Nxxxx

Super 0.5W Cool White Power PLCC-4

Surface Mount LED Indicator

Data Sheet

CAUTION: ASMT-QWBE-Nxxxx LEDs are ESD sensitive. Please observe appropriate precautions

during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

Description

The Super 0.5W Cool White Power PLCC-4 SMT LED is rst

Cool white mid-Power PLCC-4 SMT LEDs using InGaN chip

technology. The package can be driven at high current

due to its superior package design. The product is able

to dissipate the heat more eciently compared to the

Power PLCC-4 SMT LEDs. These LEDs produce higher light

output with better ux performance compared to the

Power PLCC-4 SMT LED.

The Super 0.5W Cool White Power PLCC-4 SMT LEDs are

designed for higher reliability, better performance, and

operate under a wide range of environmental conditions.

The performance characteristics of these new mid-power

LEDs make them uniquely suitable for use in harsh condi-

tions such as in automotive applications, and in electron-

ics signs and signals.

To facilitate easy pick and place assembly, the LEDs are

packed in EIA-compliant tape and reel. Every reel is

shipped in single intensity and sub color bin, to provide

close uniformity. These LEDs are compatible with the IR

solder reow process.

Features

• Industry Standard PLCC 4 platform (3.2x2.8x1.9mm)

• High reliability LED package due to enhanced silicone

resin material

• Mid-Power intensity brightness with optimum ux

performance using InGaN chip technologies

• Available in Cool White

• Available in 8mm carrier tape & 7 inch reel

• Low Thermal Resistance 60°C/W

• Super wide viewing angle at 120 degree

• JEDEC MSL 2a

Applications

1. Interior automotive

a. Instrument panel backlighting

b. Central console backlighting

c. Navigation and audio system backlighting

d. Dome/Map lighting

e. Push button backlighting

f. Puddle lamp.

g. Glove compartment illumination

2. Exterior automotive

a. Number plate illumination

3. Electronic signs and signals

a. Decorative lighting

4. Oce automation, home appliances, industrial

equipment

a. Panel/button backlighting

b. Display backlighting

Summary of content (9 pages)

PAGE 1
ASMT-QWBE-Nxxxx Super 0.5W Cool White Power PLCC-4 Surface Mount LED Indicator Data Sheet Description Features The Super 0.5W Cool White Power PLCC-4 SMT LED is first Cool white mid-Power PLCC-4 SMT LEDs using InGaN chip technology. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more efficiently compared to the Power PLCC-4 SMT LEDs.
PAGE 2
Package Drawing 1.9 ± 0.2 A C C 1. 2. 3. 4. 1.15 ± 0.2 0.56 (TYP.) 0.97 Ø 2.4 0.7 CATHODE MARKING Notes: 0.6 ± 0.3 0.41 (TYP.) A 3.2 ± 0.2 3.6 ± 0.2 2.2 ± 0.2 0.79 ± 0.3 2.8 ± 0.2 All dimensions in millimeters. Lead polarity as shown in figure 12. Terminal finish: Ag plating. Encapsulation material: silicone resin. Figure 1. Package Drawing Table 1. Device Selection Guide Luminous Flux, ΦV[1] (lm) Color Part Number Min. Flux (lm) Cool White ASMT-QWBE-NFH0E 15.0 Typ. Flux (lm) Max.
PAGE 3
Table 2. Absolute Maximum Ratings (TA = 25 °C) Parameters ASMT-QWBE-Nxxxx DC Forward Current [1] 150 mA Peak Forward Current [2] 300 mA Power Dissipation 513 mW Reverse Voltage -4V Junction Temperature 125 °C Operating Temperature -40 °C to +110 °C Storage Temperature -40 °C to +110 °C Notes: 1. Derate Linearly as shown in Figure 6. 2. Duty Factor = 10%, Frequency = 1kHz Table 3.
PAGE 4
1.4 1 RELATIVE LUMINOUS FLUX (NORMALIZED AT 25°C) RELATIVE LUMINOUS FLUX (NORMALIZED AT 150 mA) 1.2 0.8 0.6 0.4 0.2 0 0 30 60 90 120 DC FORWARD CURRENT - mA 1 0.8 0.6 0.4 0.2 0 -50 150 140 120 100 CURRENT - mA RΘJA = 110°C/W 80 60 120 80 60 40 40 20 20 0 20 40 60 80 TEMPERATURE (°C) 100 0 120 RΘJP = 60°C/W 100 0 20 -0.008 -0.006 5mA 100mA 0.001 50mA 0.000 -0.004 -0.002 0.000 -0.001 25mA -0.001 -0.002 -0.002 x COORDINATE Figure 7. Chromaticity shift vs forward current 0.
PAGE 5
NORMALIZED INTENSITY 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 D -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 9. Radiation Pattern 10 - 30 SEC. 255 - 260ºC 3 C/SEC. MAX. TEMPERATURE 217ºC 200ºC -6ºC/SEC. MAX. Note: Diameter "D" should be smaller than 2.2mm 150ºC 3ºC/SEC. MAX. Figure 10. Recommended Pick and Place Nozzle Size 60 - 120 SEC. 100 SEC. MAX. TIME (Acc.
PAGE 6
TRAILER COMPONENT LEADER 200 mm MIN. FOR Ø180 REEL. 200 mm MIN. FOR Ø330 REEL. 480 mm MIN. FOR Ø180 REEL. 960 mm MIN. FOR Ø330 REEL. C A USER FEED DIRECTION Figure 13. Tape Leader and Trailer Dimensions +0.1 Ø1.5 –0 4 ± 0.1 2 ± 0.05 B A A 8 ± 0.1 Ø1 +0.1 –0 B 3.45 ± 0.1 3.6 ± 0.1 1.75 ± 0.1 5.5 ± 0.05 12 + 0.3 – 0.1 0.229 ± 0.01 VIEW B-B ALL DIMENSIONS IN mm. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 15. Reeling Orientation C A A 3.8 ± 0.1 VIEW A-A Figure 14.
PAGE 7
Moisture Sensitivity Device Color (X1) This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. W A. Storage before use - Unopen moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months.
PAGE 8
Color Bin Limits Bin ID Sub Bin ID 5K 5Ka 5Kb 5Kc 5Kd 5L 5La 5Lb 5Lc 5Ld 6K 6Ka 6Kb 6Kc 6Kd 6L 6La 6Lb 6Lc 6Ld Limits (Chromaticity Coordinates) x 0.296 0.304 0.302 0.294 y 0.259 0.270 0.276 0.264 x 0.294 0.302 0.300 0.291 y 0.264 0.276 0.281 0.268 x 0.304 0.313 0.312 0.302 y 0.270 0.284 0.291 0.276 x 0.302 0.312 0.310 0.300 y 0.276 0.291 0.297 0.281 x 0.291 0.300 0.298 0.288 y 0.268 0.281 0.288 0.274 x 0.288 0.298 0.295 0.285 y 0.274 0.
PAGE 9
0.41 0.39 8Ld Y-COORDINATE 0.35 7Lb 7La 6Ld 0.33 7Kb 6Lc 0.31 6La 5Kb 5Ka 0.27 0.29 0.29 0.30 0.30 5000K - 4500K 7Kc 5600K - 5000K 6Kc 7000K - 5600K 5Kd 5Kc 5La 8Ka 7Kd 6Ka 5Lc 5Lb 7Lc 6Kb 5Ld 0.29 8Kc 8Kb 7Ka 6Kd 6Lb 8Kd 8La 7Ld 0.25 0.28 8Lc 8Lb 0.37 10000K - 7000K 0.31 0.31 0.32 0.32 0.33 0.33 0.34 0.34 0.35 0.35 X-COORDINATE Packaging Option (X5) Option Test Current Package Type Reel Size E 150mA Top Mount 7 Inch VF Bin Limits Bin ID Min.