Datasheet

ManualsBrandsBROADCOM ManualsHighPower-LEDsHighPower LED Cold white 570 mW 45 lm 120 ° 3.4 V 150 mA

ASMT-QWBC-Nxxxx

Super 0.5W Cool White Power PLCC-4

Surface Mount LED Indicator

Data Sheet

Description

The Super 0.5W Cool White Power PLCC-4 SMT LED is

Cool white mid-Power PLCC-4 SMT LEDs using InGaN chip

technology. The package can be driven at high current

due to its superior package design. The product is able to

dissipate the heat more eciently compared to the Power

PLCC-4 SMT LEDs. These LEDs produce higher light output

with better ux performance compared to the Power

PLCC-4 SMT LED.

The Super 0.5W Cool White Power PLCC-4 SMT LEDs are

designed for higher reliability, better performance, and

operate under a wide range of environmental conditions.

The performance characteristics of these new mid-power

LEDs make them uniquely suitable for use in harsh condi-

tions such as in automotive applications, and in electronics

signs and signals.

To facilitate easy pick and place assembly, the LEDs are

packed in EIA-compliant tape and reel. Every reel is

shipped in single intensity and color bin, to provide close

uniformity.

Features

• Industry Standard PLCC 4 platform (3.2x2.8x1.9mm)

• High reliability package with enhanced silicone resin

encapsulation

• High brightness with optimum ux performance using

InGaN chip technologies

• Available in Cool White

• Available in 8mm carrier tape & 7 inch reel

• Low Thermal Resistance 40°C/W

• Wide viewing angle at 120 degree

• JEDEC MSL 2

Applications

1. Interior automotive

a. Instrument panel backlighting

b. Central console backlighting

c. Navigation and audio system backlighting

d. Dome/Map lighting

e. Push button backlighting

f. Puddle lamp

g. Glove compartment illumination

2. Exterior automotive

a. Number plate illumination

3. Electronic signs and signals

a. Decorative lighting

4. Oce automation, home appliances, industrial

equipment

a. Panel/button backlighting

b. Display backlighting

CAUTION: ASMT-QWBC-Nxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions

during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

Summary of content (10 pages)

PAGE 1
ASMT-QWBC-Nxxxx Super 0.5W Cool White Power PLCC-4 Surface Mount LED Indicator Data Sheet Description Features The Super 0.5W Cool White Power PLCC-4 SMT LED is Cool white mid-Power PLCC-4 SMT LEDs using InGaN chip technology. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more efficiently compared to the Power PLCC-4 SMT LEDs.
PAGE 2
Package Drawing 1.9 ± 0.2 2.2 ± 0.2 A C C 1.15 ± 0.2 0.97 0.56 (TYP.) φ 2.4 3.2 ± 0.2 3.6 ± 0.2 0.41 (TYP.) A 0.6 ± 0.3 0.79 ± 0.3 2.8 ± 0.2 0.7 CATHODE MARKING Notes: 1. All Dimensions in millimeters. 2. Lead Polarity as shown in Figure 14. 3. Terminal Finish: Ag plating 4. Encapsulation material: Silicone resin Figure 1. Package Drawing Table 1. Device Selection Guide (TJ = 25°C) Luminous Flux, ΦV[1] (lm) Color Part Number Min. Flux (lm) Typ. Flux (lm) Max.
PAGE 3
Table 2. Absolute Maximum Ratings (TA = 25°C) Parameters ASMT-QWBC-Nxxxx DC Forward Current [1] 150 mA Peak Forward Current [2] 300 mA Power Dissipation 570 mW Reverse Voltage, VR @ 10 µA 4 Junction Temperature 125°C Operating Temperature -40°C to +120°C Storage Temperature -40°C to +120°C Notes: 1. Derate Linearly as shown in Figure 6. 2. Duty Factor = 10%, Frequency = 1kHz Table 3.
PAGE 4
250 FORWARD CURRENT - mA RELATIVE INTENSITY 300 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 430 480 530 580 630 WAVELENGTH - nm 680 730 200 150 100 50 0 780 Figure 2. Relative Intensity Vs. Wavelength NORMALIZED LUMINOUS FLUX. (NORMALIZED AT 25°C) RELATIVE LUMINOUS FLUX . (NORMALIZED AT 150 mA) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 100 150 200 DC FORWARD CURRENT - mA 250 4 0.8 0.6 0.4 0.2 -25 0 25 50 75 TJ - JUNCTION TEMPERATURE - °C 100 Figure 5. Relative Flux Vs.
PAGE 5
0.40 0.40 0.20 0.10 t D= p T 0.00 1.00E-05 1.00E-03 1.00E-01 tp - Time - (S) 0.30 CURRENT - A 0.30 CURRENT - A D= D= 0.05 0.10 0.25 0.50 1 T 1.00E-03 1.00E-01 tp - Time - (S) 1.00E+01 Figure 7b. Maximum Pulse Current Vs. Ambient Temperature. Derated Based on TA = 85°C, RθJ-A = 110°C/W. 0.20 FORWARD VOLTAGE SHIFT - V COORDINATE SHIFT 0.20 0.25 0.000 Cx -0.005 Cy -0.010 -0.015 0.15 0.10 0.05 0.00 -0.05 -0.10 -0.15 100 150 200 FORWARD CURRENT - mA Figure 8. Chromaticity Shift Vs.
PAGE 6
ID Note: Diameter "ID" should be bigger than 2.3mm TEMPERATURE 10 - 30 SEC. 217°C 200°C 255 - 260°C 3°C/SEC. MAX. 6°C/SEC. MAX. 150°C 3°C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. Figure 12. Recommended Pick and Place Nozzle Size Figure 13. Recommended Pb-free Reflow Soldering Profile 2.4 0.6 0.9 X 6 1.
PAGE 7
TRAILER 200 mm MIN. FOR Ø180 REEL. 200 mm MIN. FOR Ø330 REEL. COMPONENT LEADER 480 mm MIN. FOR Ø180 REEL. 960 mm MIN. FOR Ø330 REEL. C A USER FEED DIRECTION Figure 15. Tape Leader and Trailer Dimensions Ø1.5 +0.1 –0 4 ± 0.1 4 ± 0.1 2 ± 0.05 1.75 ± 0.1 2.29 ± 0.1 C C A A 3.5 ± 0.05 8 +0.3 –0.1 3.05 ± 0.1 +0.1 Ø1 –0 0.229 ± 0.01 8° ALL DIMENSIONS IN mm. Figure 16. Tape Dimensions USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 17. Reeling Orientation 7 3.8 ± 0.
PAGE 8
Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body only. Please refer to Avago Application Note AN 5288 for detail information.
PAGE 9
Color Bin Limits Bin ID Sub Bin ID Limits (Chromaticity Coordinates) 5K 5Ka 5Kb 5Kc 5Kd 5L 5La 5Lb 5Lc 5Ld 6K 6Ka 6Kb 6Kc 6Kd 6L 6La 6Lb 6Lc 6Ld 9 x 0.296 0.304 0.302 0.294 y 0.259 0.270 0.276 0.264 x 0.294 0.302 0.300 0.291 y 0.264 0.276 0.281 0.268 x 0.304 0.313 0.312 0.302 y 0.270 0.284 0.291 0.276 x 0.302 0.312 0.310 0.300 y 0.276 0.291 0.297 0.281 x 0.291 0.300 0.298 0.288 y 0.268 0.281 0.288 0.274 x 0.288 0.298 0.295 0.285 y 0.274 0.
PAGE 10
0.41 0.39 8Ld 8Lc 8Lb 0.37 7Ld Y-COORDINATE 0.35 6Ld 0.33 6Lc 6Lb 0.31 6Kd 6La 0.27 7Kd 7Kb 7Kc 8Kc 8Ka 5000K - 4500K 7Ka 5600K - 5000K 6Kc 6Ka 5Lc 5Lb 5La 5Kb 5Ka 7La 8Kb 6Kb 5Ld 0.29 7Lb 7Lc 8Kd 8La 7000K - 5600K 5Kd 5Kc 10000K - 7000K 0.25 0.28 0.30 0.32 0.34 0.36 0.38 X-COORDINATE Packaging Option (X5) VF Bin Limits Bin ID Min. Max. Option Test Current Package Type Reel Size S4 2.90 3.20 E 150mA Top Mount 7 Inch S5 3.20 3.50 S6 3.50 3.