Datasheet
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.
AV02-3200EN - October 10, 2011
DISCLAIMER: Avago’s products and software are not speci cally designed, manufactured or authorized for sale
as parts, components or assemblies for the planning, construction, maintenenace or direct operation of a
nuclear facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to
make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use.
Handling Precaution
The encapsulation material of the LED is made of silicone
for better product reliability. Since silicone is a soft
material, avoid pressing on the silicon or poking the silicon
with a sharp object as the product could be damaged
and cause premature failure. During assembly handling,
the unit should be held by the body only. Please refer to
Avago Application Note AN 5288 for additional handling
information and proper procedures.
Moisture Sensitivity
This product has a Moisture Sensitive Level 2a rating
per JEDEC J-STD-020. Refer to Avago Application Note
AN5305, Handling of Moisture Sensitive Surface Mount
Devices, for additional details and a review of proper
handling procedures.
A. Storage before use
An Unopened moisture barrier bag (MBB) can be stored
at < 40°C/90%RH for 12 months. If the actual shelf life
has exceeded 12 months and the humidity Indicator
Card (HIC) indicates that baking is not required, then it
is safe to re ow the LEDs per the original MSL rating.
It is recommended that the MBB not be opened prior
to assembly (e.g. for IQC).
B. Control after opening the MBB
The humidity indicator card (HIC) shall be read
immediately upon opening of MBB.
The LEDs must be kept at < 30°C/60%RH at all times
and all high temperature related processes including
soldering, curing or rework need to be completed
within 672 hours.
C. Control for un nished reel
Unused LEDs must be stored in a sealed MBB with
desiccant or desiccator at < 5%RH.
D. Control of assembled boards
If the PCB soldered with the LEDs is to be subjected to
other high temperature processes, the PCB need to be
stored in sealed MBB with desiccant or desiccator at
<5%RH to ensure that all LEDs have not exceeded their
oor life of 672 hours.
E. Baking is required if:
The HIC indicator is not BROWN at 10% and is AZURE at
5%.
The LEDs are exposed to condition of > 30°C/60% RH at
any time.
The Led oor life exceeded 672 hrs.
The recommended baking condition is: 60 ±5° C for 20 hrs.