Datasheet

8
Device Color (X
1
)
A Amber
H Red Orange
R Red
Flux Bin Select (X
2
X
3
)
Individual reel will contain parts from one bin only
X
2
Min Flux Bin
X
3
Max Flux Bin
Flux Bin Limits
Bin ID Min. (lm) Max. (lm)
0 3.30 4.30
A 4.30 5.50
B 5.50 7.00
C 7.00 9.00
D 9.00 11.50
E 11.50 15.00
F 15.00 19.50
G 19.50 25.50
H 25.50 33.00
J 33.00 43.00
K 43.00 56.00
L 56.00 73.00
Tolerance of each bin limit = ± 12%
Handling Precaution
The encapsulation material of the product is made of sili-
cone for better reliability of the product. As silicone is a
soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly or
handling, the unit should be held on the body only. Please
refer to Avago Application Note AN 5288 for detail infor-
mation.
Moisture Sensitivity
This product is qualied as Moisture Sensitive Level 2a
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the reli-
ability of the product. Do refer to Avago Application Note
AN5305 Handling of Moisture Sensitive Surface Mount
Devices for details.
A. Storage before use
- Unopen moisture barrier bag (MBB) can be stored at
<40°C/90%RH for 12 months. If the actual shelf life
has exceeded 12 months and the HIC indicates that
baking is not required, then it is safe to reow the
LEDs per the original MSL rating.
- It is not recommended to open the MBB prior to
assembly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read
immediately upon opening of MBB.
- The LEDs must be kept at <30°C / 60%RH at all time
and all high temperature related process including
soldering, curing or rework need to be completed
within 672 hours.
C. Control for unnished reel
- For any unuse LEDs, they need to be stored in sealed
MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected
to other high temperature processes, the PCB
need to be stored in sealed MBB with desiccant
or desiccator at <5%RH to ensure no LEDs have
exceeded their oor life of 672 hours.
E. Baking is required if:
- The HIC indicator is not GREEN at 10% and is AZURE
at 5%
- The LEDs are exposed to condition of >30°C / 60%
RH at any time.
- The LEDs oor life exceeded 672 hours.
Recommended baking condition: 60±5ºC for 20hrs