Datasheet

ManualsBrandsBROADCOM ManualsHighPower-LEDsHighPower LED Amber 0.5 W 17 lm 120 ° 2.3 V 150 mA

ASMT-QxBD-Axxxx

Super 0.5 W Power PLCC-4 Surface Mount LED Indicator

Data Sheet

Description

The Super 0.5 W Power PLCC-4 SMT LED is an extension

of Power PLCC-4 SMT LEDs. The package can be driven

at high current due to its superior package design. The

product is able to dissipate the heat more eciently

compared to the Power PLCC-4 SMT LEDs. These LEDs

produce higher light output with better ux performance

compared to the Power PLCC-4 SMT LED.

The Super 0.5 W Power PLCC-4 SMT LEDs are designed for

higher reliability, better performance, and operate under

a wide range of environmental conditions. The perfor-

mance characteristics of these new mid-power LEDs make

them uniquely suitable for use in harsh conditions such as

in automotive applications, and in electronics signs and

signals.

To facilitate easy pick and place assembly, the LEDs are

packed in EIA-compliant tape and reel. Every reel is

shipped in single intensity and color bin (except for red),

to provide close uniformity.

Super 0.5 W Power PLCC-4 SMT LED is available in red and

amber colors.

Features

• Industry Standard PLCC 4 platform (3.2 ×2.8 ×1.9 mm)

• High reliability package with enhanced silicone resin

encapsulation

• High intensity brightness with optimum ux perfor-

mance using AllnGaP chip technologies

• Available in Red and Amber colors

• High optical eciency

• Available in 8mm carrier tape & 7 inch reel

• Low Thermal Resistance 60 °C/W

• Super wide viewing angle at 120°

• Longer life time with minimum degradation due to

enhanced Silicone resin material

• JEDEC MSL 2

Applications

• Exterior automotive

– Turn signals

– Side repeaters

– CHSML

– Rear combination lamp

– Side markers

– Truck clearance lamp

• Electronic signs and signals

– Channel lettering

– Contour lighting

– Indoor variable message sign

• Oce automation, home appliances, industrial

equipment

– Front panel backlighting

– Push button backlighting

– Display backlighting

CAUTION: ASMT-QxBD-Axxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions

during handling and processing. Refer to Avago Application Note AN-1142 for additional details.

Summary of content (9 pages)

PAGE 1
ASMT-QxBD-Axxxx Super 0.5 W Power PLCC-4 Surface Mount LED Indicator Data Sheet Description Features The Super 0.5 W Power PLCC-4 SMT LED is an extension of Power PLCC-4 SMT LEDs. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more efficiently compared to the Power PLCC-4 SMT LEDs. These LEDs produce higher light output with better flux performance compared to the Power PLCC-4 SMT LED. • Industry Standard PLCC 4 platform (3.
PAGE 2
Package Drawing 1.9 ± 0.2 2.2 ± 0.2 C A A 1.15 ± 0.2 0.97 0.56 (TYP.) φ 2.4 3.2 ± 0.2 3.6 ± 0.2 0.41 (TYP.) C 0.6 ± 0.3 0.79 ± 0.3 2.8 ± 0.2 0.7 ANODE MARKING Note: 1. All Dimensions in millimeters. 2. Lead Polarity as shown in Figure 13. 3. Terminal Finish: Ag plating 4. Encapsulation material: Silicone resin Figure 1. Package Drawing Table 1. Device Selection Guide Luminous Flux, ΦV[1] (lm) Color Part Number Min. Flux (lm) Typ. Flux (lm) Max.
PAGE 3
Table 2. Absolute Maximum Ratings (TA = 25 °C) Parameters ASMT-QxBD-Axxxx DC Forward Current [1] 150 mA Peak Forward Current [2] 300 mA Power Dissipation 450 mW Reverse Voltage, VR @ 100 µA 5V Junction Temperature 125 °C Operating Temperature -40 °C to +120 °C Storage Temperature -40 °C to +120 °C Notes: 1. Derate Linearly as shown in Figure 6. 2. Duty Factor = 10%, Frequency = 1 kHz Table 3.
PAGE 4
RELATIVE INTENSITY FORWARD CURRENT - mA 300 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 AlInGaP Red AlInGaP Amber 250 200 100 50 480 530 580 630 WAVELENGTH - nm 680 730 780 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 25°C) RELATIVE LUMINOUS FLUX (NORMALIZED AT 150 mA) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 100 150 200 DC FORWARD CURRENT - mA 250 300 Figure 4. Relative Intensity Vs. Forward Current 2 FORWARD VOLTAGE - V 3 4 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.
PAGE 5
0.40 0.30 0.30 CURRENT - A CURRENT - A 0.40 0.20 0.10 D= 0.00 1.00E-05 1.00E-03 tp T T IF D= 0.00 1.00E-05 1.00E-04 1.00E-03 1.00E-02 1.00E+01 FORWARD VOLTAGE SHIFT - V DOMINANT WAVELENGTH - nm 610.0 605.0 600.0 590.0 AlInGaP Amber 0 50 100 150 200 FORWARD CURRENT - mA 250 300 NORMALIZED INTENSITY Figure 8. Dominant Wavelength Vs. Forward Current - AlInGaP Devices. 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES Figure 10.
PAGE 6
TEMPERATURE 10 - 30 SEC. ID Note: Diameter "ID" should be bigger than 2.3mm 217°C 200°C 255 - 260°C 3°C/SEC. MAX. 6°C/SEC. MAX. 150°C 3°C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. Figure 11. Recommended Pick and Place Nozzle Size Figure 12. Recommended Pb-free Reflow Soldering Profile 2.4 0.6 0.
PAGE 7
TRAILER 200 mm MIN. FOR Ø180 REEL. 200 mm MIN. FOR Ø330 REEL. COMPONENT LEADER 480 mm MIN. FOR Ø180 REEL. 960 mm MIN. FOR Ø330 REEL. C A USER FEED DIRECTION Figure 14. Tape Leader and Trailer Dimensions Ø1.5 +0.1 –0 4 ± 0.1 4 ± 0.1 2 ± 0.05 1.75 ± 0.1 2.29 ± 0.1 C C A A 3.5 ± 0.05 8 +0.3 –0.1 3.05 ± 0.1 +0.1 Ø1 –0 0.229 ± 0.01 8° ALL DIMENSIONS IN mm. Figure 15. Tape Dimensions USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 16. Reeling Orientation 7 3.8 ± 0.
PAGE 8
Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body only. Please refer to Avago Application Note AN 5288 for detail information.
PAGE 9
Color Bin Select (X4) Color Bin Limits Individual reel will contain parts from one full bin only. Amber/Yellow Min. (nm) Max. (nm) 2 583.0 586.0 X4 0 Full Distribution 3 586.0 589.0 A 1 and 2 only 4 589.0 592.0 B 2 and 3 only 5 592.0 595.0 C 3 and 4 only 6 595.0 598.0 D 4 and 5 only E 5 and 6 only Red Orange Min. (nm) Max. (nm) G 1, 2 and 3 only 1 611.0 616.0 H 2, 3 and 4 only 2 616.0 620.0 J 3, 4 and 5 only 3 620.0 625.