Datasheet

ManualsBrandsBROADCOM ManualsHighPower-LEDsCollimator Water clear Transparent 30 °

ASMT-M0xx

Collimator Lens Option

for Power LED ASMT-Mxxx and QSMT-MWBx

Data Sheet

Features

• Available in 6°, 15° & 30° beam

• Energy ecient

• Work with all Power LED ASMT-Mxxx.

For white QSMT-MWBx is recommended

• Acrylic plastic

Applications

• Portable (ash light, bicycle head light)

• Reading light

• Architectural lighting

• Garden lighting

• Decorative lighting

Introduction

Power LED Light Source is a high performance energy

ecient device which can handle high thermal and

high driving current. The Collimator Lens ASMT-M0xx

are design to eciently collimate the light of Power LED

ASMT-Mxxx & QSMT-MWBx into a 6°, 15° and 30° beam.

The collimating optics has been eectively design to

collimate the light to 6°, 15° and 30° viewing angle. The

design and Acrylic material use bring the eciency

>85%.

The Lens Material Properties

The lens material is made from optical grade Acrylic and

the lens max allowable operating temperature is 75°C. It

can be used for all colors.

Summary of content (5 pages)

PAGE 1
ASMT-M0xx Collimator Lens Option for Power LED ASMT-Mxxx and QSMT-MWBx Data Sheet Introduction Features Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The Collimator Lens ASMT-M0xx are design to efficiently collimate the light of Power LED ASMT-Mxxx & QSMT-MWBx into a 6°, 15° and 30° beam.
PAGE 2
Collimator Lens Dimension Relative Intensity ASMT-M006 (6° beam) 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 Radiation Pattern -70 -50 -30 -10 10 30 50 70 90 30 50 70 90 -30 -10 10 30 Off-Axis Angle (°) 50 70 90 Off-Axis Angle (°) Relative Intensity ASMT-M015 (15° beam) 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Radiation Pattern -90 -70 -50 -30 -10 10 Off-Axis Angle (°) Relative Intensity ASMT-M030 (30° beam) 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.
PAGE 3
Application of Collimator Lens Lens Attachment Lens attachment to the unit is through “press-fitting”. To make sure that the lens is properly attached, the lens need to be press-fitted until it reaches a hard stop at the top surface of the unit. Hold the lens by position A & B and make sure that the lens is perpendicular to the unit top surface as shown in Figure 2. Surface C and D of the Collimator Lens have to be pressed perpendicularly onto the flange surface of E and F until the hard stop.
PAGE 4
Package Tray Dimensions For ASMT-M006 (6° beam)
PAGE 5
For ASMT-M015 and ASMT-M030 (15° and 30° beam) AVAGO’S PRODUCTS AND SOFTWARE ARE NOT SPECIFICALLY DESIGNED, MANUFACTURED OR AUTHORIZED FOR SALE AS PARTS, COMPONENTS OR ASSEMBLIES FOR THE PLANNING, CONSTRUCTION, MAINTENANCE OR DIRECT OPERATION OF A NUCLEAR FACILITY OR FOR USE IN MEDICAL DEVICES OR APPLICATIONS. CUSTOMER IS SOLELY RESPONSIBLE, AND WAIVES ALL RIGHTS TO MAKE CLAIMS AGAINST AVAGO OR ITS SUPPLIERS, FOR ALL LOSS, DAMAGE, EXPENSE OR LIABILITY IN CONNECTION WITH SUCH USE.