Datasheet

3
Part Numbering System
Note:
1. For selection details, see page 10.
Device Selection Guide (T
J
= 25 °C)
Part Number Color
Luminous Flux (lm) /
Radiometric Power (mW), Φ
V
[1,2]
Test Current
(mA)
Dice
Technology
Electrically
Isolated
Metal Slug Min. Typ. Max.
ASMT-JD30-ALN01 Deep Red 175 mW 240 mW 355 mW 350 AllnGaP No
ASMT-JR30-AST01 Red 51.7 58.0 87.4 350 AllnGaP No
ASMT-JH30-ARS01 Red Orange 39.8 48.0 67.2 350 AllnGaP No
ASMT-JA30-ARS01 Amber 39.8 48.0 67.2 350 AllnGaP No
ASMT-JG31-NUW01 Green 87.4 110.0 129.5 350 InGaN Yes
ASMT-JB31-NNP01 Blue 18.1 25.0 30.6 350 InGaN Yes
ASMT-JL31-NRS01 Royal Blue 515 mW 600 mW 685.0 mW 350 InGaN Yes
Notes:
1. Φ
V
is the total luminous ux / radiometric power output as measured with an integrating sphere at 25 ms mono pulse condition.
2. Flux tolerance is ±10%.
ASMT- J x
1
3 x
2
– x
3
x
4
x
5
x
6
x
7
Packaging Option
Color Bin Selection
Maximum Flux Bin Selection
Minimum Flux Bin Selection
Dice Type
N – InGaN
A – AlInGaP
Heat Sink
0 – Electrically Non-isolated
1 – Electrically Isolated
Color
D – Deep Red
R – Red
H – Red Orange
A – Amber
G – Green
B – Blue
L – Royal Blue