Datasheet

ManualsBrandsBROADCOM ManualsHighPower-LEDsHighPower LED Red 3 W 48 lm 165 ° 2.1 V 700 mA

ASMT-Jx3x

3 W Mini Power LED Light Source

Data Sheet

Description

The 3 W Mini Power LED Light Source is a high perfor-

mance energy ecient device that can handle high

thermal and high driving current. Option with electrically

isolated metal slug is also available.

The low prole package design and ultra small footprint is

suitable for a wide variety of applications especially where

space and height is a constraint.

The package is compatible with reow soldering process.

To facilitate easy pick and place assembly, the LEDs are

packed in EIA-compliant tape and reel.

Features

• Available in Deep Red, Red, Red Orange, Amber, Green,

Blue, and Royal Blue

• Small footprint and low prole

• Symmetrical outline

• Energy ecient

• Direct heat transfer from metal slug to motherboard

• Compatible with reow soldering process

• High current operation

• Long operation life

• Wide viewing angle

• Silicone encapsulation

• Non-ESD sensitive (threshold > 16 kV)

• MSL 1 products

Applications

• Sign backlight

• Safety, exit and emergency sign lightings

• Specialty lighting such as task lighting and reading

lights

• Retail display

• Commercial lighting

• Accent or marker lightings, strip or step lightings

• Portable lightings, bicycle head lamp, torch lights.

• Decorative lighting

• Architectural lighting

• Pathway lighting

• Street lighting

• Pedestrian street lighting

• Tunnel lighting

• Horticulture

CAUTION: Customer is advised to keep the LEDs in the MBB when not in use as prolonged exposure to

environment might cause the silver plated leads to tarnish, which might cause diculties in soldering.

Summary of content (12 pages)

PAGE 1
ASMT-Jx3x 3 W Mini Power LED Light Source Data Sheet Description Features The 3 W Mini Power LED Light Source is a high performance energy efficient device that can handle high thermal and high driving current. Option with electrically isolated metal slug is also available.
PAGE 2
Package Dimensions 5.0 4.0 Ø 3.7 4.0 0.7 1.0 0.8 Lens Cathode Mark 0.3 1.85 Anode Lead NC NC NC Metal Slug 0.65 Body NC Cathode Lead 0.60 Ø 1.70 Figure 1. ASMT-Jx3x package outline drawing Notes: 1. All dimensions in millimeters. 2. Metal slug is connected to anode for electrically non-isolated option. 3. Tolerance is ± 0.1 mm, unless otherwise specified. 4. Terminal finish: Ag plating. 5. Corresponding NC (No Connection) leads adjacent to anode and cathode leads can be electrically short.
PAGE 3
Part Numbering System ASMT- J x1 3 x2 – x3 x4 x5 x6 x7 Packaging Option Color Bin Selection Maximum Flux Bin Selection Minimum Flux Bin Selection Dice Type N – InGaN A – AlInGaP Heat Sink 0 – Electrically Non-isolated 1 – Electrically Isolated Color D R H A G B L – Deep Red – Red – Red Orange – Amber – Green – Blue – Royal Blue Note: 1. For selection details, see page 10.
PAGE 4
Absolute Maximum Ratings Parameter AllnGaP InGaN Units DC Forward Current [1] 700 700 mA Peak Pulsing Current 1500 2400 mA Power Dissipation 1820 2730 mW LED Junction Temperature 125 135 °C Operating Metal Slug Temperature Range at 350 mA -40 to +115 -40 to +120 °C Operating Metal Slug Temperature Range at 700 mA -40 to +100 -40 to +105 °C Storage Temperature Range -40 to +120 -40 to + 120 °C Soldering Temperature See Figure 24 Reverse Voltage [2] Not recommended Notes: 1
PAGE 5
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 AMBER RED ORANGE RED DEEP RED RELATIVE LUMINOUS FLUX/ RADIOMETRIC POWER (NORMALIZED AT 350 mA) RELATIVE INTENSITY AlInGaP 520 535 550 565 580 595 610 625 640 655 670 685 700 WAVELENGTH - nm 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 0 0.5 1 1.5 FORWARD VOLTAGE - V 2 2.5 Figure 4. Forward Current vs. Forward Voltage 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 1.60 D= 0.05 0.10 0.25 0.50 1.00 1.40 1.20 1.
PAGE 6
120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 25 0.05 FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25°C) RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25°C) DEEP RED RED RED-ORANGE AMBER 50 75 100 JUNCTION TEMPERATURE,TJ - °C -0.20 -0.25 -0.30 -0.35 800 700 700 MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA -0.
PAGE 7
1 0.9 GREEN 0.8 BLUE ROYAL BLUE 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 405 430 455 480 505 530 555 580 605 630 WAVELENGTH - nm 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 FORWARD VOLTAGE - V Figure 14. Forward Current vs. Forward Voltage 7 3 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 100 200 300 400 500 MONO PULSE CURRENT - mA 600 700 Figure 13. Relative Luminous Flux vs. Mono Pulse Current NORMALIZED INTENSITY FORWARD CURRENT - mA Figure 12. Relative Intensity vs.
PAGE 8
D= tp tp T IF T IP - PULSE CURRENT - A IP - PULSE CURRENT - A 3.00 2.80 2.60 2.40 2.20 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 0.00001 0.0001 D= 0.05 0.10 0.25 0.50 1.00 0.001 0.01 0.1 1 10 100 3.00 2.80 2.60 2.40 2.20 2.00 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 0.00001 0.0001 D= 0.001 1 10 100 0.05 FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25 °C) 0.
PAGE 9
0.80 0.85 Solder Pad ø1.90 1.75 3.50 5.20 Slug Indepdent ∅3.2 1.30 Solder Pad Figure 22. Recommended soldering land pattern Figure 23. Recommended pick and place nozzle tip. Inner diameter = 3.2 mm TEMPERATURE 10 - 30 SEC. 217 °C 200 °C 255 - 260 °C 3°C/SEC. MAX. 6°C/SEC. MAX. 150 °C 3 °C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Figure 24.
PAGE 10
Option Selection Details Flux Bin Limit [x4, x5] Color Bin ID Luminous Flux (lm)/ Radiometric Power (mW) at 350 mA Min. Max. Blue M N 13.9 18.1 18.1 23.5 P 23.5 30.6 Q 30.6 39.8 R S 39.8 51.7 51.7 67.2 T 67.2 87.4 U 87.4 99.6 V 99.6 113.6 W 113.6 129.5 L 175.0 225.0 M 225.0 275.0 N 275.0 355.0 355.0 435.
PAGE 11
Tape and Reel – Option 1 ø1.5 ±0.1 4.00 ±.10 0.25 ±0.02 2.00 ±.05 8.00 ±.10 ø1.5 ±0.25 8° 2.01 ±0.1 0.25 ±0.02 2.05 ±.10 4.15 ±.10 5.25 ±.10 12.00 +.30 .10 5.50 ±.05 5° 1.75 ±0.01 Figure 25. Carrier Tape Dimensions 13.2 ±.5 16.0 ±.5 3 ±0.5 ø21.0 ±0.5 ø13.1 ±0.5 ø10 178 ±1 ø60 ±0.5 4 ±0.5 5 ±0.5 Notes: 1. Empty component pockets sealed with top cover tape. 2. 250 or 500 pieces per reel. 3. Drawing not to scale. 4. All dimensions are in millimeters. Figure 26.
PAGE 12
USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 27. Reeling Orientation DISCLAIMER: Avago’s products and software are not specifically designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications.