Datasheet

7
Figure 10. Tape dimensions.
Figure 11. Reeling orientation.
CATHODE SIDE
PRINTED LABEL
USER FEED DIRECTION
4 ± 0.1
2 ± 0.05
B
B
5.5 ± 0.05
AA
12 +0.3/-0.1
1.5 +0.1/-0
3.6 ± 0.1
3.8 ± 0.1
0.229 ± 0.01
C A
C C
VIEW B-B
VIEW A-A
3.45 ± 0.1
8 ± 0.1
1 +0.1/-0
ALL DIMENSIONS ARE IN MILLIMEERS (mm).
1.75 ± 0.1
This product is qualied as Moisture Sensitive Level 2a per Jedec J-
STD-020. Precaution when handling this moisture sensitive product
is important to ensure the reliability of the product. Do refer to Avago
Application Note AN5305 Handling of Moisture Sensitive Surface
Mount Devices for details.
A. Storage before use
Unopen moisture barrier bag (MBB) can be stored at
<40°C/90%RH for 12 months. If the actual shelf life has
exceeded 12 months and the HIC indicates that baking
is not required, then it is safe to reow the LEDs per the
original MSL rating.
It is not recommended to open the MBB prior to
assembly (e.g., for IQC).
B. Control after opening the MBB
The humidity indicator card (HIC) shall be read im-
mediately upon opening of MBB.
The LEDs must be kept at <30°C/60%RH at all times
and all high temperature related processes, including
soldering, curing or rework, need to be completed
within 672 hours.
C. Control for unnished reel
– For any unused LEDs, they need to be stored in
sealed MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
– If the PCB soldered with the LEDs is to be subjected
to other high temperature processes, the PCB needs to
be stored in sealed MBB with desiccant or desiccator at
<5% RH to ensure no LEDs have exceeded their oor
life of 672 hours.
E. Baking is required if:
“10%” is Not blue and “5%” HIC indicator turns pink.
The LEDs are exposed to condition of >30°C/60% RH
at any time.
The LEDs oor life exceeded 672 hours.
Recommended baking condition: 60 ± 5°C for
20 hours.