Datasheet

ManualsBrandsBROADCOM ManualsLEDs & AccessoriesSMD LED PLCC4 Red orange 1120 mcd 120 ° 50 mA 2.8 V

Features

• Industry standard PLCC-4 (Plastic Leaded Chip

Carrier)

• High reliability LED package

• Mid-Power intensity brightness with optimum ux

performance using TS AlInGaP dice technologies

• Available in Red, Red Orange and Amber colors

• High optical eciency

• Higher ambient temperature at the same current

possible compared to PLCC-2

• Super wide viewing angle at 120°

• Available in 8 mm carrier tape on 7-inch reel

• Compatible with both IR and TTW soldering process

Appli cation s

• Interior automotive

– Instrument panel backlighting

– Central console backlighting

– Navigation and audio system

– Push button backlighting

• Exterior automotive

– Turn signals

– Side repeaters

– CHMSL

– Rear combination lamp

– Puddle light

• Electronic signs and signals

– Channel lettering

– Contour lighting

– Indoor variable message sign

• Oce automation, home appliances, industrial

equipment

– Front panel backlighting

– Push button backlighting

– Display backlighting

Envisium

is the premier class of mid-Power LEDs us-

ing TS AlInGaP chip technology. Envisium

LEDs oer

unparalleled performance, engineering and design ex-

ibility. For the very rst time, customers have options for

mid-power LEDs.

Description

The Envisium

Power PLCC-4 SMT LED is an extension

of Avago’s PLCC-4 SMT LEDs. The package can be driven

at high current due to its superior package design. The

product is able to dissipate the heat more eciently

compared to the conventional PLCC-2 SMT LEDs. These

LEDs produce higher light output with better ux perfor-

mance compared to the conventional PLCC-4 SMT LEDs.

The Envisium

Power PLCC-4 SMT LEDs are designed for

higher reliability, better performance, and operate un-

der a wide range of environmental conditions. The per-

formance characteristics of these new mid-power LEDs

make them uniquely suitable for use in harsh conditions

such as in automotive applications, and in electronics

signs and signals.

To facilitate easy pick and place assembly, the LEDs are

packed in EIA-compliant tape and reel. Every reel is

shipped in single intensity and color bin (except for red),

to provide close uniformity. These LEDs are compatible

with the IR solder reow process. Due to the high reliabil-

ity feature of these products, they also can be mounted

using through-the-wave soldering process.

The Envisium

Power PLCC-4 SMT LED is available in 3

colors, red, red-orange and amber.

ASMC-PxB9-Txxxx

Envisium

Power PLCC-4 Surface Mount LED

Data Sheet

Summary of content (8 pages)

PAGE 1
ASMC-PxB9-Txxxx EnvisiumTM Power PLCC-4 Surface Mount LED Data Sheet Envisium Features Envisium is the premier class of mid-Power LEDs using TS AlInGaP chip technology. EnvisiumTM LEDs offer unparalleled performance, engineering and design flexibility. For the very first time, customers have options for mid-power LEDs.
PAGE 2
Package Dimensions 2.8 ± 0.2 1.9 ± 0.2 2.2 ± 0.2 A 0.8 ± 0.1 0.1 TYP. C 3.2 ± 0.2 3.5 ± 0.2 0.8 ± 0.3 C C 0.5 ± 0.1 0.7 ± 0.1 CATHODE MARKING NOTE: ALL DIMENSIONS IN mm. Table 1. Device Selection Guide Color Part Number Red ASMC-PRB9-TV005 Red Orange Amber ASMC-PHB9-TW005 ASMC-PAB9-TV005 Intensity Bin Min. IV (mcd) Max. IV (mcd) V1 715.0 Total Flux FV (mlm)[2,3] Typ. Test Current (mA) 900.0 2600.0 50 AlInGaP 50 AlInGaP 50 AlInGaP V2 900.0 1125.0 3300.0 W1 1125.
PAGE 3
Part Numbering System ASMC - PX1 B9 - T X2 X3 X4 X5 Packaging Option Color Bin Selection Intensity Bin Limit Intensity Bin Selection LED Chip Color Absolute Maximum Ratings (TA = 25°C) Parameters DC Forward Current[1] Peak Forward Current[2] Power Dissipation Reverse Voltage Junction Temperature Operating Temperature Storage Temperature ASMC-PxB9-Txxxx 70 mA[3,4] 200 mA 240 mW 5V 125°C -40°C to +100°C -40°C to +100°C Notes: 1. Derate linearly as shown in figure 4. 2. Duty factor = 10%, Frequency = 1 kHz.
PAGE 4
1.0 RED ORANGE 0.9 AMBER RELATIVE INTENSITY 0.8 RED 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 530 580 630 680 730 780 WAVELENGTH – nm 1.4 70 1.2 60 50 40 30 20 10 0 0 1 2 3 1.0 0.8 0.6 0.4 0.2 0 4 80 MAXIMUM FORWARD CURRENT – mA 80 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 50 mA) FORWARD CURRENT – mA Figure 1. Relative intensity vs. wavelength. 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 DC FORWARD CURRENT – mA FORWARD VOLTAGE – V Figure 2. Forward current vs.
PAGE 5
20 SEC. MAX. TEMPERATURE 240°C MAX. 3°C/SEC. MAX. 100-150°C 183°C –6°C/SEC. MAX. 3°C/SEC. MAX. 120 SEC. MAX. 60-150 SEC. TIME Figure 6a. Recommended Sn-Pb reflow soldering profile. 10 to 20 SEC. +5 °C 255 °C -0 °C 217 °C TEMPERATURE 3 °C/SEC. MAX. 125 °C ± 25 °C 6 °C/SEC. MAX. MAX. 120 SEC. 60 to 150 SEC. TIME * THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX. Figure 6b. Recommended Pb-free reflow soldering profile.
PAGE 6
4.05 3.8 SOLDER-RESIST 3.4 A 4.05 C 1.1 8.5 C PAD CLEARANCE C 4.05 0.5 0.2 8.5 PAD CLEARANCE REPRESENTS ELECTRICAL CONNECTION BETWEEN THE CATHODE PADS Figure 8. Recommended soldering pad pattern. TRAILER 200 mm MIN. FOR ∅180 REEL. 200 mm MIN. FOR ∅330 REEL. COMPONENT LEADER 480 mm MIN. FOR ∅180 REEL. 960 mm MIN. FOR ∅330 REEL. C A USER FEED DIRECTION Figure 9. Tape leader and trailer dimensions.
PAGE 7
∅1.5 +0.1/-0 4 ± 0.1 2 ± 0.05 3.6 ± 0.1 1.75 ± 0.1 B A A 5.5 ± 0.05 C C C A 12 +0.3/-0.1 3.8 ± 0.1 ∅1 +0.1/-0 8 ± 0.1 0.229 ± 0.01 B VIEW B-B 3.45 ± 0.1 VIEW A-A ALL DIMENSIONS ARE IN MILLIMEERS (mm). Figure 10. Tape dimensions. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 11. Reeling orientation. This product is qualified as Moisture Sensitive Level 2a per Jedec JSTD-020.
PAGE 8
Intensity Bin Select (X2X3) Individual reel will contain parts from one half bin only X2 Min IV Bin X3 0 2 3 4 5 6 7 8 9 Full Distribution 2 half bins starting from X21 3 half bins starting from X21 4 half bins starting from X21 5 half bins starting from X21 2 half bins starting from X22 3 half bins starting from X22 4 half bins starting from X22 5 half bins starting from X22 Intensity Bin Limits & Typical Flux Bin ID Min. (mcd) Max. (mcd) V1 715.00 900.00 V2 900.00 1125.00 W1 1125.00 1400.00 W2 1400.